VESTA维斯塔斯升弓电磁阀SVE252100-00000-SMP标准阀
VESTA维斯塔斯升弓电磁阀SVE252100-00000-SPEC
VESTA维斯塔斯线圈MS02400 24VDC
VESTA维斯塔斯升弓电磁阀SVE252100 现货
VESTA维斯塔斯辅助阀Elbac现货红色旋钮辅助阀
PakerP2FCA472线圈现货
VESTA维斯塔斯电磁阀SVE253100现货
VESTA维斯塔斯 升弓电磁阀 SVE252100 现货
Parker 线圈 P2FCA472 现货
VESTA维斯塔斯升弓电磁阀SVE252100 吉林现货
VESTA维斯塔斯辅助阀Elbac吉林现货
PakerP2FCA472线圈吉林现货
VESTA维斯塔斯电磁阀SVE253100吉林现货
VESTA维斯塔斯 升弓电磁阀 SVE252100 吉林现货
Parker 线圈 P2FCA472 吉林现货
VESTA维斯塔斯升弓电磁阀SVE252100 现货定制阀
VESTA维斯塔斯辅助阀Elbac现货
PakerP2FCA472线圈现货
VESTA维斯塔斯电磁阀SVE253100现货
VESTA维斯塔斯 升弓电磁阀 SVE252100 现货
Parker 线圈 P2FCA472 现货
VESTA维斯塔斯升弓电磁阀SVE252100 长春现货
VESTA维斯塔斯辅助阀 Elbac长春现货
PakerP2FCA472线圈长春现货
VESTA维斯塔斯电磁阀SVE253100长春现货
VESTA维斯塔斯 升弓电磁阀 SVE252100 长春现货
Parker 线圈 P2FCA472 长春现货
VESTA维斯塔斯升弓电磁阀SVE252100 进口原装现货
VESTA维斯塔斯辅助阀Elbac进口原装现货
PakerP2FCA472线圈进口原装现货
VESTA维斯塔斯电磁阀SVE253100进口原装现货
VESTA维斯塔斯 升弓电磁阀 SVE252100 进口原装现货
Parker 线圈 P2FCA472 进口原装现货
VESTA维斯塔斯升弓电磁阀SVE252100
VESTA维斯塔斯升弓电磁阀SVE352100 现货
VESTA维斯塔斯辅助阀 Elbac现货
PakerP2FCA472线圈现货
VESTA维斯塔斯电磁阀SVE353100现货
VESTA维斯塔斯 升弓电磁阀 SVE352100 现货
Parker 线圈 P2FCA472 现货
VESTA维斯塔斯升弓电磁阀SVE352100 吉林现货
VESTA维斯塔斯辅助阀Elbac吉林现货
PakerP2FCA472线圈吉林现货
VESTA维斯塔斯电磁阀SVE353100吉林现货
54-44-90 O2 Oxygen
54-44-01 CO Carbon Monoxide
54-44-02 H2S Hydrogen Sulfide
54-44-03 SO2 Sulfur Dioxide
54-52-01 CO Carbon Monoxide
54-52-02 H2S Hydrogen Sulfide
54-45-90 O2 Oxygen
54-45-01 CO Carbon Monoxide
54-45-05 CO+ CO Plus
54-45-19 CO-H CO Minus
54-45-02 H2S Hydrogen Sulfide
54-45-03 SO2 Sulfur Dioxide
54-45-21 NH3 Ammonia
54-45-18 Cl2 Chlorine (specific)
54-45-09 NO2 Nitrogen Dioxide
54-45-10 HCN Hydrogen Cyanide
54-45-13 PH3 Phosphine
54-47-90 O2 Oxygen (2 years) 0 – 30%/Vol. 0.1%
54-47-01 CO Carbon Monoxide 0 – 1000 PPM 1 PPM
54-47-05 CO+ CO Plus dual purpose CO: 0 – 1000 PPM 1 PPM
CO/H2S (provides a H2S: 0 – 200 PPM 1 PPM
non-specific readout
for CO and H2S)
54-47-19 CO-H CO Minus, reduced 0 – 1000 PPM 1 PPM
sensitivity to H2
54-47-02 H2S Hydrogen Sulfide 0 – 200 PPM 1 PPM
54-47-03 SO2 Sulfur Dioxide 0 – 20 PPM 0.1 PPM
54-47-21 NH3 Ammonia 0 – 100 PPM 1 PPM
54-47-18 Cl2 Chlorine (specific) 0 – 20 PPM 0.1 PPM
54-47-09 NO2 Nitrogen Dioxide 0 – 20 PPM 0.1 PPM
54-47-10 HCN Hydrogen Cyanide 0 – 100 PPM 0.1 PPM
54-47-13 PH3 Phosphine 0 – 20 PPM 0.01 PPM
54-47-03 SO2 Sulfur Dioxide 0 – 100 PPM 0.1 PPM
54-46-101 Replacement sensor filter.
35-964 Lanyard for ToxiLtd and
ToxiPro.
54-46-102 Replacement belt clip for
ToxiLtd and ToxiPro.
54-46-103 Replacement clothes clip for
ToxiLtd and ToxiPro.
54-46-109 Replacement cell phone-style
swivel clip.
54-46-104 Manual sample draw kit.
Includes adapter, probe, and 10'
tubing. Not for use with Cl2.
54-46-105 Case for Value Pack. Foam-lined
case, with room for 1 compact
sized calibration gas cylinder.
54-46-106 Calibration/sample draw
adapter.
54-46-107 Calibration adapter. Includes
FEP lined tubing for reactive
gases (NH3, Cl2, HCN and
NO2).
54-46-108 ToxiPro datalogger upgrade.
Field upgradeable.
54-26-0603 ToxiPro BioTrak Software Kit.
Includes BioTrak software and
manual.
54-37-90 O2 Oxygen
54-37-01 CO Carbon Monoxide
54-37-05 CO+ “CO Plus”
54-37-19 CO-H CO Minus, reduced sensitivity to H2
54-37-02 H2S Hydrogen Sulfide
54-37-03 SO2 Sulfur Dioxide
54-37-21 NH3 Ammonia
54-37-08 Cl2 Chlorine (non-specific)
54-37-18 Cl2 Chlorine (specific)
54-37-09 NO2 Nitrogen Dioxide
54-37-10 HCN Hydrogen Cyanide
54-37-13 PH3 Phosphine
54-37-80A LEL LEL (Alkaline)
54-37-80ND LEL LEL (Rechargeable)
54-39-90 O2 Oxygen (2 years) 0 – 30%/Vol. 0.1%
54-39-01 CO Carbon Monoxide 0 – 1000 PPM 1 PPM
54-39-05 CO+ Dual purpose CO/H2S CO: 0 – 1000 PPM 1 PPM
Provides a non-specific H2S: 0 – 200 PPM 1 PPM
readout for CO and H2S
54-39-19 CO-H CO Minus, reduced sensitivity 0 – 1000 PPM 1 PPM
to H2
54-39-02 H2S Hydrogen Sulfide 0 – 200 PPM 1 PPM
54-39-03 SO2 Sulfur Dioxide 0 – 100 PPM 0.1 PPM
54-39-21 NH3 Ammonia 0 – 100 PPM 1 PPM
54-39-08 Cl2 Chlorine (non-specific) 0 – 20 PPM 0.1 PPM
54-39-18 Cl2 Chlorine (specific) 0 – 20 PPM 0.1 PPM
54-39-09 NO2 Nitrogen Dioxide sensor 0 – 20 PPM 0.1 PPM
54-39-10 HCN Hydrogen Cyanide 0 – 100 PPM 0.1 PPM
54-39-13 PH3 Phosphine 0 – 10 PPM 0.01 PPM
54-38-03 Rubber boot.
54-38-04 Toxi Vision PC programming
kit. Includes software and
serial interface cable.
35-964 Lanyard for Toxi Vision.
54-38-05 Replacement belt clip.
54-38-06 Manual sample draw kit.
Includes adapter, probe, and
10 tubing Not for use with
Cl2.
54-38-07 Case for Value Pack. Foamlined
case, with room for 1
compact sized calibration
gas cylinder.
54-38-01 Calibration/sample draw
adapter.
54-38-09 Calibration adapter. Includes
FEP lined tubing for reactive
gases (NH3, Cl2, HCN and
NO2).
54-38-11 Replacement 10-Pack
ToxiTube Dosimeter Tubes.
54-28-01 Carbon Monoxide (CO)
(35 and 100 ppm)
54-28-01-C Carbon Monoxide (CO)
(25 and 100 ppm)
54-28-02 Hydrogen Sulfide (H2S)
(10 and 20 ppm)
10-384 Bump test adapter for
Mighty-Tox
54-48-300 LEL/O2
54-48-301 LEL/O2/CO
54-48-302 LEL/O2/H2S
54-48-314 LEL/O2/Duo-Tox (CO/H2S)
54-49-80 LEL Combustible Gas 0 – 100% LEL 1% LEL
54-49-90 O2 Oxygen 0 – 30%/Vol. 0.1%
54-49-01 CO Carbon Monoxide 0 – 1000 PPM 1 PPM
54-49-02 H2S Hydrogen Sulfide 0 – 200 PPM 1 PPM
54-49-14 Duo-Tox Dual Channel CO/H2S CO: 0 – 1000 PPM 1 PPM
(Provides Substance specific H2S: 0 – 200 PPM 1 PPM
readouts for CO and H2S)
54-49-200 MultiPro sensor exchange set. O2, LEL, Duo-Tox
54-49-201 MultiPro sensor exchange set. O2, LEL, CO
54-49-202 MultiPro sensor exchange set. O2, LEL, H2S
54-49-102 Continuous sample pump for
MultiPro. Includes 10 of sample
tubing and sample probe
assembly.
54-49-104 Sample draw/calibration
adapter.
54-49-105 Sample draw kit. Includes
adapter, squeeze bulb, 10 of
tubing and sample probe
assembly.
54-05-A0403 Sample probe assembly. Does
not include tubing, squeeze
bulb, or sample draw adapter.
54-05-A0405 Sample probe assembly with
11.5-inch stainless-steel probe
tube. Does not include tubing,
squeeze bulb, or sample draw /
calibration adapter.
54-49-103-1 Slip-in fast charger (110 VAC)
for MultiPro. Includes “wallcube”
supply.
54-49-103-12 Slip-in fast charger (12 VDC)
for MultiPro. Includes “cigarette
lighter” style adapter and vehicle
mounting hardware.
54-49-106 MultiPro Alkaline battery pack.
54-49-107 MultiPro Li-Ion rechargeable
battery pack.
54-26-0603 MultiPro BioTrak Software Kit.
Includes BioTrak software and
manual.
54-26-0605S Infrared communication device
(Serial – IrDA). Requires one
available PC serial port.
54-26-0605U Infrared communication device
(USB – IrDA). Requires one
USB port.
54-49-110 MultiPro datalogger upgrade.
Field upgradeable.
54-40-30000 LEL/O2
54-40-30100 LEL/O2/CO
54-40-30200 LEL/O2/H2S
54-40-30102 LEL/O2/CO/H2S
54-42-80 LEL Combustible Gas 0 – 100% LEL 1% LEL
54-42-90 O2 Oxygen 0 – 30%/Vol. 0.1%
54-42-01 CO Carbon Monoxide 0 – 1000 PPM 1 PPM
54-42-02 H2S Hydrogen Sulfide 0 – 200 PPM 1 PPM
54-42-101 MultiVision Exchange set of 4 sensors.
O2, LEL, CO and H2S
54-41-004B MultiVision Rubber Boot.
Black.
54-41-004R MultiVision Rubber Boot.
Red.
54-41-004Y MultiVision Rubber Boot.
Yellow.
54-41-007 MultiVision Manual Sample
draw kit. Includes adapter,
squeeze bulb, 10 of tubing.
54-41-008 MultiVision BioTrak Download
software. Requires MultiVision
datalogging option be installed.
Computer must support
infrared communication (IrDA)
to download.
54-26-0605S Infrared communication device
(Serial – IrDA) – Requires one
available PC serial port.
54-26-0605U Infrared communication device
(USB – IrDA) – Requires one
available USB port.
54-41-001 MultiVision Calibration
Adapter.
54-41-005 MultiVision Remote Sampling
Adapter (Manual sample draw).
54-41-003 MultiVision Remote Sampling
Adapter (Internal pump).
Includes pump activation magnet.
Requires internal pump to
be installed in MultiVision.
54-41-006 MultiVision Internal Pump
Upgrade. Must be returned to
Biosystems service department.
This part number includes
labor charges for upgrade.
Does not include freight.
54-41-007 MultiVision Manual sample
draw kit. Includes adapter,
squeeze bulb, 10 of tubing and
sample probe assembly.
54-05-A0403 Sample probe assembly. Does
not include tubing, squeeze
bulb, or sample draw adapter.
54-05-A0405 Sample probe assembly with
11.5-inch stainless-steel probe
tube. Does not include tubing,
squeeze bulb, or sample draw /
calibration adapter.
54-41-002 MultiVision Slip-in fast charger
(110 VAC). Includes “wall cube”
supply.
54-41-010 MultiVision Slip-in fast charger
(12 VDC). Includes “cigarette
lighter” style adapter, and vehicle
mounting hardware.
54-41-011 MultiVision Five instrument
110 VAC slip-in multi-charger.
Includes power supply.
35-0488 MultiVision Alkaline Battery
Pack.
35-0489 MultiVision NiMH Battery
Pack.
54-41-016 MultiVision PC programming
kit. Used for instrument configuration
only. Includes software
and serial interface cable.
54-41-014 MultiVision Datalogger and
infrared communication (IrDA)
upgrade. Must be returned to
Biosystems service department.
Includes labor charges for
upgrade. Does not include
freight.
54-41-008 MultiVision BioTrak Download
software. Requires MultiVision
datalogging option be installed.
Computer must support
infrared communication (IrDA)
to download.
54-26-0605S Infrared communication device
(Serial – IrDA) – Requires one
available PC serial port.
54-26-0605U Infrared communication device
(USB – IrDA) – Requires one
available USB port.
13-230 MultiVision Reference Manual.
13-232 MultiVision Quick Reference
Card.
22-165 MultiVision training video.
22-166 MultiVision training CD-ROM.
54-41-004B MultiVision Rubber Boot.
Black.
54-41-004R MultiVision Rubber Boot.
Red.
54-41-004Y MultiVision Rubber Boot.
Yellow.
42-010 Shoulder Strap.
54-41-012 MultiVision Case for Value
Pack. Foam-lined case, with
room for 1 compact sized calibration
gas cylinder.
35-0259 MultiVision Case for Confined
Space Kit. Foam-lined, waterproof
Pelican style case with
room for one standard sized
calibration gas cylinder.
54-41-013 MultiVision Calibration kit.
Includes foam-lined carrying
case with room for up to three
cylinders of calibration gas. Kit
contains 12-023 regulator and
other fittings. Kit does not
include gas.
54-41-V9045 MultiVision Value Pack “Makeup”
Kit. Includes Value Pack
case with 54-9045E calibration
gas and 12-022 economy regulator.
For use with O2/LEL and
O2/LEL/CO configurations.
54-41-V9047 MultiVision Value Pack “Makeup”
Kit. Includes Value Pack
case with 54-9047E calibration
gas and 12-023 regulator.
For use with O2/LEL/H2S
configurations.
54-41-V9049 MultiVision Value Pack “Makeup”
Kit. Includes Value Pack
case with 54-9049E calibration
gas and 12-023 regulator. For
use with O2/LEL/CO/H2S
configurations.
54-41-001 MultiVision Calibration
Adapter.
54-23-000 No Sensors Installed
54-23-300 LEL/O2
54-23-301 LEL/O2/CO
54-23-305 LEL/O2/CO+
54-23-319 LEL/O2/CO-H
54-23-302 LEL/O2/H2S
54-23-314 LEL/O2/Duo-Tox (CO/H2S)
54-23-303 LEL/O2/SO2 (0.0-25/0.1 ppm Incr.)
54-23-321 LEL/O2/NH3
54-23-308 LEL/O2/Cl2 (non-specific)
54-23-318 LEL/O2/Cl2 (specific)
54-23-312 LEL/O2
54-23-320 LEL/O2
54-23-309 LEL/O2/NO2
54-23-310 LEL/O2/HCN
54-23-313 LEL/O2/PH3
54-25-80 LEL Combustible Gas 0 – 100% LEL 1% LEL
54-25-90 O2 Oxygen 0 – 30%/Vol. 0.1%
54-25-01 CO Carbon Monoxide 0 – 1000 PPM 1 PPM
54-25-05 CO+ CO Plus dual purpose CO/H2S CO: 0 – 1000 PPM 1 PPM
(provides a non-specific H2S: 0 – 200 PPM 1 PPM
readout for CO and H2S)
54-25-19 CO-H CO Minus, reduced sensitivity 0 – 1000 PPM 1 PPM
to H2
54-25-02 H2S Hydrogen Sulfide 0 – 200 PPM 1 PPM
54-25-14 Duo-Tox Dual Channel CO/H2S CO: 0 – 1000 PPM 1 PPM
(provides Substance specific H2S: 0 – 200 PPM 1 PPM
readouts for CO and H2S)
54-25-03 SO2 Sulfur Dioxide 0 – 25 PPM 0.1 PPM
54-25-15 SO2-Ext. Sulfur Dioxide extended range 0 – 100 PPM 1 PPM
54-25-04 NH3 Ammonia 0 – 50 PPM 1 PPM
(for software versions
prior to 2.0)
54-25-21 NH3 Ammonia 0 – 100 PPM 1 PPM
54-25-08 Cl2 Chlorine (non-specific) 0 – 50 PPM 0.1 PPM
54-25-18 Cl2 Chlorine (specific) 0 – 50 PPM 0.1 PPM
54-25-09 NO2 Nitrogen Dioxide 0 – 50 PPM 0.1 PPM
54-25-10 HCN Hydrogen Cyanide 0 – 100 PPM 0.2 PPM
54-25-13 PH3 Phosphine 0 – 20 PPM 0.1 PPM
54-26-0101 Continuous sample pump for
PhD Lite. Includes 10 of
sample tubing and sample
probe assembly.
54-26-0101-C Continuous sample pump for
PhD Lite – Configured for reactive
gas detection, such as Cl2.
Includes 10 of inert sample
tubing and sample probe
assembly.
54-26-0302 Leather holster. For PhD Lite
without pump.
54-26-0306 Leather holster. For PhD Lite
with pump attached.
54-26-0603 PhD Lite BioTrak Software Kit.
Includes BioTrak software and
manual.
54-26-0605S Infrared communication device
(Serial – IrDA) – Requires one
available PC serial port.
54-26-0605U Infrared communication device
(USB – IrDA) – Requires one
available USB port.
54-27-0802 TouchID programming kit.
Includes software, programming
wand, serial connector,
10 TouchID buttons, 10 key
chain/wall mounts for buttons
and 10 TouchID badges.
54-26-0101 Continuous sample pump for
PhD Lite. Includes 10 of sample
tubing and sample probe
assembly.
54-26-0101-C Continuous sample pump for
PhD Lite – Configured for reactive
gas detection, such as Cl2.
Includes 10’ of inert sample
tubing and sample probe
assembly.
35-0344 Tubing kit for reactive gas
detection (Cl2). Includes 10 of
tubing plus adapters.
54-26-0401 Sample draw kit. Includes
adapter, squeeze bulb, 10 of
tubing and sample probe
assembly. Not for use with Cl2.
54-05-A0403 Sample probe assembly. Does
not include tubing, squeeze
bulb, or sample draw adapter.
54-26-0301 Sample draw/calibration
adapter.
54-05-A0405 Sample probe assembly with
11.5-inch stainless-steel probe
tube. Does not include tubing,
squeeze bulb, or sample draw /
calibration adapter.
54-26-0201 Slip-in fast charger (110 VAC)
for PhD Lite. Includes “wall
cube” supply.
54-26-0202 Slip-in fast charger (12 VDC)
for PhD Lite. Includes “cigarette
lighter” style adapter, and vehicle
mounting hardware.
54-26-0204 Five instrument 110 VAC slipin
multi-charger for PhD Lite.
Includes power supply.
54-26-0601 Datalogger upgrade for PhD
Lite without “Black-Box”
recorder. (Instrument disassembly
required.) If your non-datalogging
PhD Lite shows the
time and date during startup, it
does include a “Black-Box”
recorder.
54-26-0606 Datalogger upgrade for PhD
Lite with “Black-Box” recorder.
54-26-0603 PhD Lite BioTrak Software Kit.
Includes BioTrak software and
manual.
54-26-0605S Infrared communication device
(Serial – IrDA) – Requires one
available PC serial port.
54-26-0605U Infrared communication device
(USB – IrDA) – Requires one
available USB port.
54-27-0802 TouchID programming kit.
Includes software, programming
wand, serial connector, 10
TouchID buttons, 10 key
chain/wall mounts for buttons
and 10 TouchID badges.
54-27-0805 10 TouchID buttons.
54-27-0807 10 TouchID key ring/wall
mounts. Does not include
TouchID buttons.
54-27-0810 10 TouchID badges. Does not
include TouchID buttons.
13-088 PhD Lite Reference Manual.
13-089 PhD Lite Quick Reference Card.
22-125 PhD Lite training video.
22-132 PhD Lite interactive training
CD-ROM.
54-26-0302 Leather holster. For PhD Lite
without pump.
54-26-0306 Leather holster. For PhD Lite
with pump attached.
42-011 Wrist strap.
42-010 Shoulder Strap.
54-26-0404 Case for Value Pack. Foam-lined
case, with room for 1 compact
sized calibration gas cylinder.
35-0259 Case for Confined Space Kit.
Foam-lined, waterproof
Pelican style case with room
for one standard sized calibration
gas cylinder.
54-26-0501 Calibration kit for PhD Lite.
Includes foam-lined carrying
case with room for up to three
cylinders of calibration gas. Kit
contains 12-023 regulator and
other fittings. Kit does not
include gas.
54-26-V9045 Value Pack “Make-up” Kit.
Includes Value Pack case with
54-9045E calibration gas and
12-022 economy regulator. For
use with O2/LEL and O2 /
LEL/CO, CO+, CO-H configurations.