| 详细介绍：
K-80TK2
E80T1-K2
YFL-C506M
YFL-C506M
K-80TK2 is designed for welding of 590MPa high tensile steel for low temperature service. Butt and fillet MAG welding of offshore structures, LNG and LPG carriers and storage tank, etc.
K-81TK2
E81T1-K2
YFL-C506R
YFL-C506R
K-81TK2 is designed for welding of 590MPa high tensile steel for low temperature service. Butt and fillet MAG welding of offshore structures, LNG and LPG carriers and storage tank, etc.
K-71UT
E71T-1/-9J
YFL-C504R
YFL-C504R
K-71UT is designed for welding of 490MPa low temperature steels with slow freezing slag system. It can be used in a variety of applications including railcar, automotive, machinery, shipbuilding, bridges, heavy equipment etc.
K-71TSR
E71T-12J H4
YFL-C504R
YFL-C504R
K-71TSR can be used in a variety of applications including railcar, automotive machinery, shipbuilding, bridges, heavy equipment etc. (NACE/API steel)All position for 0.4%Ni alloyed flux cored arc welding wire with 100%CO2 shielding gas.
K-81TSR
E81T1-K2
YFL-C506R
YFL-C506R
K-81TSR is designed for welding of 590MPa high tensile steel for low temperature service.Butt and fillet MAG welding of offshore structures, LNG and LPG carriers and storage tank, etc. It can be acceptable for CTOD characteristics.
K-80TK2
E80T1-K2
YFL-C506M
YFL-C506M
K-80TK2 is designed for welding of 590MPa high tensile steel for low temperature service. Butt and fillet MAG welding of offshore structures, LNG and LPG carriers and storage tank, etc.
K-81TK2
E81T1-K2
YFL-C506R
YFL-C506R
K-81TK2 is designed for welding of 590MPa high tensile steel for low temperature service. Butt and fillet MAG welding of offshore structures, LNG and LPG carriers and storage tank, etc.
K-71UT
E71T-1/-9J
YFL-C504R
YFL-C504R
K-71UT is designed for welding of 490MPa low temperature steels with slow freezing slag system. It can be used in a variety of applications including railcar, automotive, machinery, shipbuilding, bridges, heavy equipment etc.
K-71TSR
E71T-12J H4
YFL-C504R
YFL-C504R
K-71TSR can be used in a variety of applications including railcar, automotive machinery, shipbuilding, bridges, heavy equipment etc. (NACE/API steel)All position for 0.4%Ni alloyed flux cored arc welding wire with 100%CO2 shielding gas.
K-81TSR
E81T1-K2
YFL-C506R
YFL-C506R
K-81TSR is designed for welding of 590MPa high tensile steel for low temperature service.Butt and fillet MAG welding of offshore structures, LNG and LPG carriers and storage tank, etc. It can be acceptable for CTOD characteristics.
K-80TK2
E80T1-K2
YFL-C506M
YFL-C506M
K-80TK2 is designed for welding of 590MPa high tensile steel for low temperature service. Butt and fillet MAG welding of offshore structures, LNG and LPG carriers and storage tank, etc.
K-81TK2
E81T1-K2
YFL-C506R
YFL-C506R
K-81TK2 is designed for welding of 590MPa high tensile steel for low temperature service. Butt and fillet MAG welding of offshore structures, LNG and LPG carriers and storage tank, etc.
K-71UT
E71T-1/-9J
YFL-C504R
YFL-C504R
K-71UT is designed for welding of 490MPa low temperature steels with slow freezing slag system. It can be used in a variety of applications including railcar, automotive, machinery, shipbuilding, bridges, heavy equipment etc.
K-71TSR
E71T-12J H4
YFL-C504R
YFL-C504R
K-71TSR can be used in a variety of applications including railcar, automotive machinery, shipbuilding, bridges, heavy equipment etc. (NACE/API steel)All position for 0.4%Ni alloyed flux cored arc welding wire with 100%CO2 shielding gas.
K-81TSR
E81T1-K2
YFL-C506R
YFL-C506R
K-81TSR is designed for welding of 590MPa high tensile steel for low temperature service.Butt and fillet MAG welding of offshore structures, LNG and LPG carriers and storage tank, etc. It can be acceptable for CTOD characteristics
韩国高丽KNF-50焊条
类别
品名
JIS型号
焊道金属化学成分(%)
主要用途
C
Si
Mn
Cr
Mo
焊条
KM-100
DF2A-250-R
0.11
0.42
0.98
金属对金属的磨耗用，适合于齿轮和车轮的堆焊
KM-100C
DF2A-350-R
0.19
0.44
0.74
2.6
金属对金属的磨耗用，适合于齿轮和轴的堆焊
KM-300R
DF2A-300-R
0.20
0.40
0.46
2.7
金属对金属的磨耗用，适合于轴、滚柱和类似物的堆焊
KM-250
DF2A-250-B
0.11
0.52
1.72
金属对金属的磨耗用，适合于如轴、齿轮和车轮等已磨耗的部件的堆焊和维修
KM-350
DF2B-350-B
0.36
0.65
0.74
2.0
金属对金属的磨耗用，适合于滚柱、轴、链轮等的堆焊
KM-500
DF2B-450-B
0.38
0.84
1.56
2.5
适合于滚柱、链轮、螺旋轮送机和堆土机刮板等的堆焊
KM-700
DF2B-700-B
0.48
0.80
1.45
4.4
划痕用，适合于搅拌机、切割刀、挖泥机等的堆焊
KM-800
DF3C-700-B
0.68
0.50
1.23
5.7
划痕用，适合于泵铸造、叶轮和铲斗等的堆焊
KM-900
DFMA-250-B
0.52
0.30
12.1
耐震和耐磨用，适合于碎石机、高锰钢轨道、铲头刀口和挖土机凸轮的堆焊
KM-11Cr
DF4B-500-B
0.40
1.28
0.4611.2
1.4
高温时的耐磨和耐蚀用，适合于切削刀具，剪切叶片和类似物的堆焊
KM-13CrM
0.30
0.48
12.4
11.8
1.5
高温时的耐磨用，适合于锭钳、拉刀和类似物等的堆焊
KQD-600
0.42
0.57
0.40
9.7
1.3
适合于压型机、锻型钢模、工具用钢铁和经由淬火硬化的部件的堆焊
KOSPEL-800R
0.38
0.42
0.32
5.5
2.5
适合于碎石机、螺旋输送机、履带、挖泥机刀口和其他多角型边的堆焊
KM-1000
DFWA-700-S
2.98
0.60
1.88
用于磨耗严重的，适合于切削刀、推土机凸轮、混凝土搅拌机和鼓风机等的堆焊
|
放大图片
暂无相关下载
