简要说明：锐迪牌的万得模®11-C铝硅焊条产品：估价：电议，规格：齐全，产品系列编号：齐全

名称：

万得模®11-C

用于大多数铝合金的药芯焊条。特别的组合焊芯和挤压涂层显示出高速密集熔敷，焊缝无孔隙，配色佳。焊缝熔敷不能热处理或阳极氧化。

产品规格： AWS – E4043
可用的形式：手工电弧焊

Weld Mold 11-C

An aluminum alloy with extruded “thermo coating” for low temperature arc welding on weldable aluminum and aluminum alloys. A special combination of core wire and coating provides high-speed deposition of dense, porosity free welds. Arc action is smooth, quiet and stable. Has a good color match and is corrosion resistant.

Applications

Recommended for fabrication and repair of cast and wrought aluminum. It is excellent for foundry defects, machining errors and all types of salvage work. It is widely used on sheets, tubes, and extrusions in thicknesses of 1/8″ or more. It is not heat treatable and will discolor if anodized.

Procedure

Use DC, reverse polarity. Weld areas should be clean and heavier sections should be beveled. Best results will be obtained on heavier sections when preheated to approximately 500o F. The electrode should be held in a vertical position and maintain a short arc. Slag is easily removed and should be brushed or chipped before multiple passes. Clean with hot water, add 10% sulphuric acid if additional cleaning is required, and rinse clean.

Technical Data

• Available Processes: SMAW
• Tensile Strength: Up to 34,000 psi
• Class: 4043 aluminum