| 详细介绍： 厦门纪扬科技有限公司形成了以自动化设备研发与贸易服务为主营业务，结合进出口贸易服务及技术服务的一站式工业自动化设备服务商。目前，主要业务领域范围涉及机械、煤矿、电力、冶金、建材、石化、轻纺、市政工程等几十个行业。公司与上游400多家合作伙伴，包括法国施耐德、日本OMRON、德国西门子、瑞典ABB 、伊顿 、GE、德国KUKA等世界著名工控产品厂商合作密切，并建立了长期稳定的技术和商务合作关系。
液压、低压、高压，元器件、仪表。传感器、泵、阀、接触器、工业液体、工业油漆、开关.....欧美进口的工业设备配件。石油、海油、钢铁厂、电厂、化工厂、铝厂、
Part number: A-1051-1300 : 厦门纪扬19,027 Note: Adjustable base, legs and cable sold separately (see page 1-49). Horizontal mounting kit Includes: 1 × adjustable rack base 2 × 200 mm legs 2 × screws Part number: A-1051-0441 : 厦门纪扬368 Vertical mounting kit Includes: 1 × support plate 8 × support pins (short) 8 × support pins (long) Part number: A-1051-1308 : 厦门纪扬87 ACC2-2 autochange controller Data transmission: Serial (RS232) User-definable parameters: Baud rate 300–19200 Voltage range: 85 V–135 V, 170 V–275 V, 50/60 Hz automatic selection Dimensions: Height 88 mm (3.46 in) Width 290 mm (11.42 in) Depth 220 mm (8.66 in) Part number: A-1520-0101 : 厦门纪扬2,959
ACR1 autochange system accessoriesAdjustable rack base : 厦门纪扬315Part number: A-1051-0440 Leg (100 mm) : 厦门纪扬13Part number: M-1051-0147 Leg (200 mm) : 厦门纪扬24 Coordinate measuringPart number: M-1051-0148 machine probesPort replacement kits 1-49All kits contain four ports. : 厦门纪扬265Short port replacement kit : 厦门纪扬255Part number: A-5036-0049 : 厦门纪扬255Long port replacement kitPart number: A-1051-7077 Mixed port replacement kitContains two short and two long ports.Part number: A-1051-7076 ACR1 autochange system cablesPL19 5 m cable : 厦门纪扬212Part number: A-1051-0199 PL20 10 m cable : 厦门纪扬352Part number: A-1051-0045 PL21 15 m cable : 厦门纪扬461Part number: A-1051-0102 PL40 30 m cable : 厦门纪扬899Part number: A-1054-0002
ACR3 autochange rack The ACR3 forms part of the modular rack system (MRS) and is an autochange rack for probes and extension bars that incorporate the Renishaw autojoint. The ACR3 is a four-port mechanical design that traverses the MRS rail. Driven by the motion of the CMM, it locks and unlocks the autojoint between the probe and the probe head. ACR3 4-port rackCoordinate measuring Part number: A-5036-0005 : 厦门纪扬9,589 machine probes Note: For 8-port applications, two 4-port racks can be connected together. The 8-port configuration requires the use of either the MRS kit 2 or MRS kit 3 (see below).1-50 MRS kits Include: MRS rail (see below) MRS feet (2) 125 mm legs (4) Step back adaptors (2) The MRS rail is available in 400 mm, 600 mm and 1000?mm lengths. MRS kit 1 : 厦门纪扬1,205 400 mm long rail. Part number: A-4192-0001 MRS kit 2 : 厦门纪扬1,292 600 mm long rail. Part number: A-4192-0002 MRS kit 3 1000 mm long rail. Part number: A-4192-0003 : 厦门纪扬1,400 Note: The MRS kits are compatible with FCR25, SCP600 and ACR3. MRS rails : 厦门纪扬205 : 厦门纪扬269 Part number: A-4192-0050 (400 mm) : 厦门纪扬376 Part number: A-4192-0051 (600 mm) Part number: A-4192-0052 (1000 mm)
ACR3 components : 厦门纪扬1,400 Coordinate measuring : 厦门纪扬86 machine probesSCP600 : 厦门纪扬102 1-51Stylus change port for SP600.Part number: A-2098-0933 : 厦门纪扬364 : 厦门纪扬376MRS legs : 厦门纪扬151Part number: A-4192-0061 (62.5 mm) : 厦门纪扬151Part number: A-4192-0053 (125 mm) : 厦门纪扬151MRS heavy duty leg kit : 厦门纪扬13?60?mm × 350?mm long. One leg per kit.Part number: A-4192-0020 MRS adjustable foot platePart number: A-4192-0702 MRS leg and foot adaptorPart number: A-4192-0055 MRS fixed footPart number: A-4192-0056 MRS step back adaptorPart number: A-4192-0058 M8 T nut *Part number: P-NU18-0005 *
Manual autojoint probe stand Renishaw’s manual autojoint probe stand (MAPS) is a low- cost storage rack capable of holding up to six combinations of probes, extension bars, and accessories. The stand can be mounted directly on the table of a CMM using the appropriate socket head bolt (maximum size M10, 3/8 in) which is passed through the center of the base.Coordinate measuring Standard autochange rack legs (100 mm and 200 mm long) are machine probes compatible with this stand and can be stacked to accommodate longer probe extensions with longer stylus extensions. As an alternative to the support pillar, a wall mounting bracket is available to enable the stand to be mounted to a cabinet, wall or any other vertical surface. Height: 285 mm Depth: 80 mm Width: 235 mm1-52 Part number: A-1071-0001 : 厦门纪扬222 MSR1 rack The MSR1 rack is intended for use on either manual or DCC CMMs to hold pre-qualified stylus assemblies fitted to TP20 or TP200 probe modules. The rack provides convenient storage and protects the kinematic coupling mechanism from contamination. Overall height: 285 mm Depth (inc wall bracket): 86 mm Width: 236 mm MSR1 with leg and base (wall mount kit included) Part number: A-1371-0347 : 厦门纪扬404
Datum sphereThe Renishaw universal datum sphere enhances the performance of manual and fullyautomated CMMs. It allows for quick and easy adjustment to set ball stem over a wide rangeof probe datuming angles. This enables datuming above, centrally and below the ball. Eachdatum sphere is supplied with its own certificate, giving ball diameter and roundness. Allsphere measurements are performed on equipment traceable to UK (NPL) standards.Specifications: Hard-wearing tungsten carbide sphere (ball) available in Coordinate measuring five sizes machine probesMetric: ?12 mm, ?19 mm and ?25 mmInch: ?3/4 in and ?1 inSphericity: to within 0.1 μm (0.000004 in)Diametric tolerance: ±1 μm (0.00004 in)Datum sphere kitIncludes: 1 datum ball (selected by size) 1-53 Pivot pillar Base C spanner Ball certificate Storage boxDescrtption Part number ?12 mm ball ?19 mm ball A-1034-0028 厦门纪扬545?25 mm ball ?? in ball A-1034-0027 厦门纪扬545?1 in ball A-1034-0026 厦门纪扬545 A-1034-0031 厦门纪扬545 A-1034-0035 厦门纪扬545Datum sphere fixing studsA fixing stud is required with each kit to attach the pillar to the table surface. Select one fromthe list below.Descrtption Manufacturer Part number M6 × 1 M-1034-0016 厦门纪扬27M8 × 1.25 MTI M-1034-0015 厦门纪扬27M10 × 1.5 B&S, LK Tool & Sheffield M-1034-0014 厦门纪扬275/16–18 UNC M-1034-0018 厦门纪扬273/8–16 UNC Carl Zeiss, Fanamation, LK Tool, & L.S. Starrett M-1034-0017 厦门纪扬27Datum sphere accessories (M6 thread – stem is attachedto the ball)Descrtption Part number ?12 mm datum ball A-1034-0005 厦门纪扬335?19 mm datum ball A-1034-0023 厦门纪扬335?25 mm datum ball A-1034-0002 厦门纪扬335?? in datum ball A-1034-0032 厦门纪扬335?1 in datum ball A-1034-0036 厦门纪扬3352 way adaptor M-1034-0042 3 way adaptor * M-1034-0052 厦门纪扬82Pillar extension 75 mm (2.96 in) long M-1034-0019 厦门纪扬186 厦门纪扬82*
Mahogany boxes Probe head boxes Part number Descrtption A-1015-7725 厦门纪扬100 PH1 probe head, cable, TK6 box PH6 probe head, TP2 probe, stylus, TK6 box A-1015-7731 厦门纪扬100 PH5 or PH5-1 probe head, cable, TK6 box PH10M probe head kit box A-1015-7727 厦门纪扬100 PH6A probe head kit box TP1 probe and stylus box (PC10) A-1015-7698 厦门纪扬108 MIH and accessories box TP200 probe and stylus box A-1015-7674 厦门纪扬198Coordinate measuring A-1015-7686 厦门纪扬136 machine probes A-1015-7765 厦门纪扬113 A-1015-7869 厦门纪扬1351-54 Extension bar boxes Part number Descrtption A-1015-7694 厦门纪扬113 PEL extension bars (PC19) PEM extension bars A-1015-7761 厦门纪扬131 Probe extension kits Kit EKL Part number: A-1047-7005 : 厦门纪扬994 Descrtption Quantity Part number Lightweight extension bar (50 mm) PEL1 1 A-1047-3484 Lightweight extension bar (100 mm) PEL2 1 A-1047-3485 Lightweight extension bar (200 mm) PEL3 1 A-1047-3486 Double-ended spanner 1 A-1047-3932 Box 1 A-1015-7694 PEM Kit Part number: A-1076-0100 : 厦门纪扬3,305 Descrtption Quantity Part number Multiwire extension bar (50 mm) PEM1 1 A-1076-0070 Multiwire extension bar (100 mm) PEM2 1 A-1076-0071 Mulitwire extension bar (200 mm) PEM3 1 A-1076-0072 Joint key 1 A-1051-0040 Box 1 A-1015-7761
Stylus toolsS1 C spanner (for use with TP20 probe body)Part number: A-1042-1486 : 厦门纪扬19S3 hex key 1.5 mm A/F : 厦门纪扬4Part number: P-TL01-0150 S4 hex key 3.0 mm straight arm : 厦门纪扬4 Coordinate measuringPart number: P-TL01-0300 machine probesS5 wrench 2 mm A/F : 厦门纪扬4Part number: P-TL01-0200 S6 hex key 2.5 mm A/F 1-55Part number: P-TL01-0250 : 厦门纪扬4S7 stylus tool (for use with M2 and M3 styli)Part number: M-5000-3540 : 厦门纪扬9S9 double-ended spanner : 厦门纪扬14Part number: A-1047-3932 S10 joint key (for use with autojoint)Part number: A-1051-0040 : 厦门纪扬17S12 hex key 0.9 mm A/F : 厦门纪扬4Part number: P-TL01-0089 S20 torque tool (for use with carbon fiber stylus)Part number: A-5003-2300 : 厦门纪扬48M4 stylus tool (for use with M4 and M5 styli)Part number: M-5000-3707 : 厦门纪扬12Stylus tool (for use with adaptor M-5000-9301)Part number: M-5000-9304 : 厦门纪扬15
Tool kits TK1 tool kit The TK1 tool kit is included with the MP1, MP3, MP4, MP7, MP8, MP9, MP10, MP11, MP12, MP14, MP700, and LP2 probes.Coordinate measuring Includes: Stylus tool ?1.98 mm machine probes Hex key 1.5 mm A/F Hex key 2.0 mm A/F Hex key 2.5 mm A/F Hex key 3.0 mm A/F Hex key 4.0 mm A/F Part number: A-2053-7531 : 厦门纪扬36 TK3 tool kit The TK3 tool kit is included with the M6-3 probe.1-56 Includes: Stylus tool ?1.98 mm Hex key 1.5 mm A/F Hex key 2.0 mm A/F Hex key 2.5 mm A/F Hex key 3.0 mm A/F Hex key 4.0 mm A/F Hex key 5.0 mm A/F Part number: A-2027-7046 : 厦门纪扬36 TK4 tool kit : 厦门纪扬24 Includes: S7 stylus tool (2) Hex key 1.5 mm A/F Hex key 2.5 mm A/F Part number: A-1041-7041 TK5 tool kit : 厦门纪扬62 Includes: S7 stylus tool (2) S8 spanner C spanner Double-ended spanner Hex key 1.5mm A/F Part number: A-1042-7030 TK6 tool kit : 厦门纪扬7 Includes: Hex key 2.0 mm A/F Hex key 2.5 mm A/F Hex key 3.0 mm A/F Part number: A-1042-7031 TK7 tool kit : 厦门纪扬28 Includes: Joint key S7 stylus tools (2) Hex key 1.5 mm A/F Part number: A-1039-0041
CMM metrology softwareMODUS? Coordinate measuring machine probesRenishaw’s new MODUS? softwareprovides a powerful platform for 3-axis and 1-575-axis measurement. A configurable userinterface allows native DMIS programs tobe developed online or offline, drawinggeometry, embedded dimensions andtolerance data from CAD, with fullsimulation and collision detection. Thesoftware includes certified algorithms forfeature measurement, feature constructionand part alignment.? Full support for I++ DME compliant metrology controllers, including Renishaw’s UCC range of universal CMM controllers? Full compatibility with REVO? and PH20? CAD-driven online / offline programming? Full motion simulation and collision detection, including 5-axis moves? Native DMIS support? Certified mathematical algorithms? Powerful text and graphical reporting? Flexible output of results data including certified Q-DASMODUS? MODUS? Offline*MODUS? – 3-axis and 5-axis touch-trigger MODUS? – Offline 3-axis and 5-axis touch- triggerPart number: A-5639-0001 : 厦门纪扬8,800 Part number: A-5639-0101 : 厦门纪扬4,400MODUS? – 3-axis scanning MODUS? – Offline 3-axis scanningPart number: A-5639-0003 : 厦门纪扬12,800 Part number: A-5639-0103 : 厦门纪扬6,400MODUS? – 5-axis scanning MODUS? – Offline 5-axis scanningPart number: A-5639-0005 : 厦门纪扬20,800 Part number: A-5639-0105 : 厦门纪扬10,400 Offline – Graphical reporting Part number: A-5639-0007 : 厦门纪扬1,600* The online version of MODUS? can also be run offline Options without the need to purchase MODUS? Offline. Only purchase MODUS? Offline if you require a dedicated offline Renishaw offers multiple application-specific analysis packages seat of MODUS?. including Modus Gear, Modus Spline and Modus Airfoil. These are chargeable modules added to a base package of Modus 3-axis or 5-axis. Please contact Renishaw for details.
CAD integration options Renishaw services In addition to the native IGES and STEP support, MODUS? offers Renishaw has set up a series of part numbers which a wide range of CAD options including VDA-FS, STEP, CATIA? (v5 should be referenced when ordering Renishaw services. and v4), Unigraphics?, Parasolid?, Pro/E? and SolidWorks?. For These part numbers will appear on your invoice. a complete list and pricing of CAD import / export options please contact Renishaw sales. Part number Descrtption RI-6002-0001 CMM hourly labor 厦门纪扬150/hour Software maintenance agreements RI-6002-0002 CMM hourly travel 厦门纪扬75/hour RI-6002-0003 CMM expenses as incurred Every new purchase of MODUS? comes with one year’s free RI-6002-0004 CMM in-house training 厦门纪扬450/day software updates, maintenance and support. After the first year,Coordinate measuring one-year maintenance agreements can be purchased for MODUS? machine probes and its software options. Please contact Renishaw sales for details. MODUS? training at Renishaw Inc Charge per student.1-58 4 days Part number: A-5639-1701 : 厦门纪扬3,000 3 days Part number: A-5639-1700 : 厦门纪扬2,250 2 days Part number: A-5639-1702 : 厦门纪扬1,500 1 day Part number: A-5639-1703 : 厦门纪扬750 Onsite MODUS? training Up to four people, all inclusive of expenses. 4 days Part number: RI-A-5639-1701 : 厦门纪扬9,625 3 days Part number: RI-A-5639-1700 : 厦门纪扬7,700 2 days Part number: RI-A-5639-1702 : 厦门纪扬5,775 1 day Part number: RI-A-5639-1703 : 厦门纪扬3,850 MODUS? training block : 厦门纪扬680 Part number: A-5639-2500
Section 2Machine tool probes
Inspection probes for machining centers MP11 The MP11 is a hard-wired probe ideal for small machine tools with manual tool changing. The probe is mounted in the machine spindle with the signal transmission cable connected to the machine control. With the MP11, the illuminated LED switches off every time the probe stylus contacts the workpiece.Machine tool probes Sense directions ±X, ±Y, +Z Stylus overtravel X and Y: ±17.5° Z: 8 mm (0.31 in) Stylus trigger force X and Y: 50 gf – 150 gf Unidirectional repeatability Z: 180 gf – 700 gf 1.0 μm (0.00004 in) MP11 retrofit kit2-2 Includes: MP11 probe with cable and connectors Remote socket kit 50 mm and 100 mm ceramic styli MP11 probe Renishaw Inspection Plus software Installation and applications support Includes: MP11 probe with cable and connectors A shank is not included in this kit. See the section entitled Part number: A-2045-0001 : 厦门纪扬3,079 Shanks and Toolholders for and part number information. Part number: MP11-NS-S (Available at fixed ) MP11 replacement parts Call for details Spare MP11 cable Note: The retrofit questionnaire at the end of this section must Part number: A-2045-0051 be filled out and returned to Renishaw before a retrofit order can be processed. : 厦门纪扬132 MP11 hardware only kit 4 pin connector for MP11 cable Includes: MP11 probe with cable and connectors Part number: MP11 PLUG KIT : 厦门纪扬64 Remote socket kit 50 mm and 100 mm ceramic styli A shank is not included in this kit. See the section entitled 4 pin socket for MP11 : 厦门纪扬60 Shanks and Toolholders for and part number Part number: P-CN21-0304 information. Part number: MP11-NS-KIT : 厦门纪扬3,558 Outer diaphragm kit Part number: A-2051-7105 : 厦门纪扬100
MP15The MP15 probe is used on small CNC machines with limited Z travel andmanual tool changing.The probe is mounted in the machine spindle with the signal transmission cableconnected to the machine control. With the MP15, the illuminated LED switchesoff every time the probe stylus contacts the work piece.MP15 hard-wired probe kit : 厦门纪扬2,114Part number: A-2116-1802 MP15/MP11 adaptor : 厦门纪扬225 Machine tool probesPart number: M-2116-1356 MI8 interface : 厦门纪扬198Part number: A-2037-0010 2-3
MP700 The MP700 is an optical transmission part probing system for use on machining centers. The MP700 is specifically designed to deliver high-accuracy CMM type probe performance. The MP700 uses strain gage sensors and and an internal microprocessor to provide a solid state sensor mechanism with unprecedented life and reliability. Low trigger force and consistent pre-travel results in high accuracy with long styli. The MP700 is available with either 35° or 70° output. An M code must be supplied to turn the probe on. An internal timer or M code is used to turn the probe off.Machine tool probes Sense directions ±X, ±Y, +Z Stylus overtravel X and Y: ±16.5° Z: 11 mm (0.45 in) Stylus trigger force X and Y: 19 gf Unidirectional repeatability Z: 325 gf 0.25 μm (0.00001 in) MP700 retrofit kit MP700 probe2-4 Includes: MP700 probe with 70° OMP Includes: MP700 probe OMM Adjusting plate Receiver mounting bracket 9?V alkaline battery MI12 interface Tool kit 50?mm and 100?mm carbon fiber styli Sealtite conduit Part number: A-2107-0035 (35°) : 厦门纪扬4,564 9?V alkaline battery Part number: A-2107-0070 (70°) : 厦门纪扬4,564 TK1 tool kit Renishaw Inspection Plus software MP700 probe module Installation and applications support Part number: A-2108-0001 A shank is not included in this kit. See the section entitled : 厦门纪扬4,010 Shanks and Toolholders for and part number information. MP700 OMP only Part number: MP700-NS-S (Available at fixed ) Call for details Part number: A-2107-0036 (35°) : 厦门纪扬849 Part number: A-2107-0071 (70°) : 厦门纪扬849 Note: The retrofit questionnaire at the end of this section must be filled out and returned to Renishaw before a retrofit order can OMM optical receiver be processed. MP700 hardware only kit Part number: A-2033-0576 : 厦门纪扬986 Includes: MP700 probe with 70° OMP Receiver mounting bracket OMM Part number: A-2033-0830 : 厦门纪扬119 Receiver mounting bracket MI12 interface MI12 interface : 厦门纪扬931 50?mm and 100?mm carbon fiber styli Part number: A-2075-0142 Sealtite conduit 9?V alkaline battery TK1 tool kit A shank is not included in this kit. See the section entitled Sealtite conduit Shanks and Toolholders for and part number information. ? in conduit, 5 ft long. Includes one fitting. Part number: MP700-NS-KIT : 厦门纪扬6,940 Part number: SEALTITE, 7455 : 厦门纪扬23
OMP40The OMP40 is an ultra-compact optical transmission partprobing system. Measuring just 40?mm diameter and 50?mmin length, the OMP40 is suitable for all machining and mill-turn centers. Utilizing a revised state-of-the-art modulatedoptical transmission method, the system offers the highestlevel of resistance to light interference when used withthe OMI?2/OMI?2T. The OMP40 probe is also backwardscompatible with existing OMM/MI12 and OMI receivers,enabling current MP7, MP8, MP9 and MP10 system usersto benefit from its innovative features.Sense directions ±X, ±Y, +Z Machine tool probesStylus overtravel X and Y: ±12.5° Z: 6 mm (0.23 in)Stylus trigger force X and Y: 50 gf – 90 gfUnidirectional repeatability Z: 585 gf 1.0 μm (0.00004 in)OMP40 retrofit kit 2-5Includes: OMP40 probe OMP40 probe kit : 厦门纪扬3,803 OMM : 厦门纪扬3,803 Receiver mounting bracket Includes: OMP40 MI12 interface ? AA battery (2) 50 mm and 100 mm ceramic styli Tool kit Sealtite kit Renishaw Inspection Plus software Legacy Installation and applications support Part number: A-4071-0001 A shank is not included in this kit. See section entitled ModulatedShanks and Toolholders for and part number Part number: A-4071-2001 information. OMP40 upgrade kitPart number: OMP40-NS-S (Available at fixed ) Call for details Current users of MP7, MP8, MP9 or MP10 optical transmission probes may upgrade to OMP40. A completeNote: The retrofit questionnaire at the end of this section working system (probe module plus transmission system)must be filled out and returned to Renishaw before a retrofit must be exchanged.order can be processed.OMP40 hardware only kit Includes: OMP40 probe system : 厦门纪扬1,902 Part number: RI-4071-0001 Includes: OMP40 probe OMM OMP40 accessories and replacement Receiver mounting bracket parts MI12 interface 50 mm and 100 mm ceramic styli Sealtite kitPart number: OMP40-NS-KIT : 厦门纪扬6,113 ?AA battery (2 pack) : 厦门纪扬43 Part number: P-BT03-0007 OMP60/RMP60 style shank adaptor Part number: A-4071-0031 : 厦门纪扬171
OMP40 continued OMM optical receiver : 厦门纪扬986 Part number: A-2033-0576 OMM-2 optical receiver : 厦门纪扬986 Part number: A-5492-0051 OMI-2 optical receiver/interface Part number: A-5191-0049 : 厦门纪扬1,582 OMI-2T optical receiver/interface Part number: A-5439-0049 : 厦门纪扬1,582Machine tool probes Receiver mounting bracket : 厦门纪扬119 Part number: A-2033-0830 MI12 interface2-6 Part number: A-2075-0142 : 厦门纪扬931 OSI interface Part number: A-5492-2000 : 厦门纪扬931 Sealtite conduit for OMM or OMI ? in conduit, 5 ft long. Includes one fitting. Part number: SEALTITE, 7455 : 厦门纪扬23 Sealtite conduit for OMM-2, OMI-2 or OMI-2T 5/16 in conduit, 1?meter long. Includes one fitting. Part number: A-4113-0306 : 厦门纪扬27
OMP400OMP400 is an optical probe using strain gage technology. Measuring just40?mm diameter × 50?mm in length, OMP400 is suitable for all machiningand mill-turn centers requiring uncompromised 3D metrology performance.Utilizing a revised state-of-the-art modulated optical transmission method,the system offers the highest level of resistance to light interference whenused with OMI-2. The OMP400 probe is also backwards compatible withexisting OMM/MI12 and OMI receivers, enabling current MP7, MP8, MP9and MP10 system users to benefit from its innovative features.Sense directions ±X, ±Y, +Z Machine tool probesStylus overtravel X and Y: ±18° Z: 11 mm (0.43 in)Stylus trigger force X and Y: 6 gfUnidirectional repeatability Z: 260 gf 0.25 μm (0.00001 in)OMP400 retrofit kit 2-7Includes: OMP400 probe OMP400 probe kit OMM Receiver mounting bracket Includes: OMP400 probe MI12 interface ? AA battery (2) 50 mm and 100 mm carbon fiber styli Tool kit Sealtite kit Renishaw Inspection Plus software Installation and applications supportA shank is not included in this kit. See section entitled Shanksand Toolholders for and part number information.Part number: OMP400-NS-S (Available at fixed ) Call for detailsNote: The retrofit questionnaire at the end of this section mustbe filled out and returned to Renishaw before a retrofit order canbe processed. LegacyOMP400 hardware only kit Part number: A-5069-0001 : 厦门纪扬4,564 : 厦门纪扬4,564Includes: OMP400 probe Modulated OMM Part number: A-5069-2001 Receiver mounting bracket MI12 interface OMP400 upgrade kit 50 mm and 100 mm carbon fiber styli Sealtite kit Current users of MP700 optical transmission probes may upgrade to OMP400. A complete working system (probePart number: OMP400-NS-KIT : 厦门纪扬6,940 module plus transmission system) must be exchanged.OMM optical receiver Includes: OMP400 probePart number: A-2033-0576 : 厦门纪扬986 Part number: RI-5069-0001 : 厦门纪扬2,282OMM-2 optical receiver : 厦门纪扬986 Note: A new shank is required. See section entitled ShanksPart number: A-5492-0051 and Toolholders for and part number information.
OMP400 continued OMI-2 optical receiver/interface : 厦门纪扬1,582 Part number: A-5191-0049 OMI-2T optical receiver/interface Part number: A-5439-0049 : 厦门纪扬1,582 Receiver mounting bracket : 厦门纪扬119 Part number: A-2033-0830 MI12 interfaceMachine tool probes Part number: A-2075-0142 : 厦门纪扬931 OSI interface : 厦门纪扬931 Part number: A-5492-2000 2-8 Sealtite conduit for OMM or OMI ? in conduit, 5 ft long. Includes one fitting. Part number: SEALTITE, 7455 : 厦门纪扬23 Sealtite conduit for OMM-2, OMI-2 or OMI-2T 5/16 in conduit, 1?m long. Includes one fitting. Part number: A-4113-0306 : 厦门纪扬27 To obtain optimal metrology performance, the following carbon fiber styli are recommended. Refer to the Styli section for more details. Stylus Part number 6 × 50?mm CF 6 × 100?mm CF A-5003-7306 厦门纪扬128 6 × 150?mm CF 6 × 200?mm CF A-5003-6510 厦门纪扬145 A-5003-6511 厦门纪扬274 A-5003-6512 厦门纪扬289
OMP60OMP60 is an optical transmission probing system suitablefor medium to large machining and mill-turn centers. Utilizinga revised state-of-the-art modulated optical transmissionmethod, the system offers the highest level of resistance to lightinterference. The OMP60 probe is also backwards compatible withexisting OMM/MI12 and OMI receivers. OMP60 also supports allmethods of probe activation – shank switch, spin and M code –enabling current MP7, MP8, MP9 and MP10 users to benefit fromsome of its innovative features.Sense directions ±X, ±Y, +Z Machine tool probesStylus overtravel X and Y: ±18° Z: 11 mm (0.43 in)Stylus trigger force X and Y: 75 gf – 140 gfUnidirectional repeatability Z: 530 gf 1.0 μm (0.00004 in)OMP60 retrofit kit 2-9Includes: OMP60 probe OMP60 probe kit OMM Receiver mounting bracket Includes: OMP60 probe MI12 interface AA battery (2) 50 mm and 100 mm ceramic styli Tool kit Sealtite kit Renishaw Inspection Plus software Legacy Installation and applications support Part number: A-4038-0001 : 厦门纪扬3,803A shank is not included in this kit. See section entitled Shanks : 厦门纪扬3,803and Toolholders for and part number information. Modulated Part number: A-4038-2001 Part number: OMP60-NS-S (Available at a fixed ) Call for detailsNote: The retrofit questionnaire at the end of this section must befilled out and returned to Renishaw before a retrofit order can beprocessed.OMP60 hardware only kitIncludes: OMP60 probe OMP60 upgrade kit OMM Receiver mounting bracket Current users of MP7, MP8, MP9 or MP10 optical MI12 interface transmission probes may upgrade to OMP60. A complete 50 mm and 100 mm ceramic styli working system (probe module plus transmission Sealtite kit system) must be exchanged.A shank is not included in this kit. See section entitled Shanks Includes: OMP60 probe systemand Toolholders for and part number information.Part number: OMP60-NS-KIT : 厦门纪扬6,113 Part number: RI-4038-0001 : 厦门纪扬1,902
OMP60 continued OMM optical receiver : 厦门纪扬986 Part number: A-2033-0576 OMM-2 optical receiver : 厦门纪扬986 Part number: A-5492-0051 OMI-2 optical receiver/interface Part number: A-5191-0049 : 厦门纪扬1,582 OMI-2T optical receiver/interfaceMachine tool probes Part number: A-5439-0049 : 厦门纪扬1,582 Receiver mounting bracket : 厦门纪扬119 Part number: A-2033-0830 2-10 MI12 interface : 厦门纪扬931 Part number: A-2075-0142 OSI interface : 厦门纪扬931 Part number: A-5492-2000 Sealtite conduit for OMM or OMI ? in conduit, 5?ft long. Includes one fitting. Part number: SEALTITE, 7455 : 厦门纪扬23 Sealtite conduit for OMM-2, OMI-2 or OMI-2T 5/16 in conduit, 1?m long. Includes one fitting. Part number: A-4113-0306 : 厦门纪扬27
OMP60MOMP60M is a modular version of the OMP60. The OMP60M,probe module, adaptors and extensions need to be purchased 7 6separately. 3 11 8 14 9 5 10 2 12 13 Machine tool probes 141 – OMP60M transmission module 15Part number: A-4038-1003 : 厦门纪扬1,1702 – OMP60M probe module 2-11Part number: A-4038-1002 : 厦门纪扬3,0563 – OMP60M 100?mm extensionPart number: A-4038-1010 : 厦门纪扬618 11 – LP2 probe assembly Part number: A-2063-6098 4 – OMP60M 150?mm extension : 厦门纪扬2,961Part number: A-4038-1027 : 厦门纪扬801 12 – OMP60M 3-way adaptor5 – OMP60M 200?mm extension Part number: A-4113-0784 : 厦门纪扬1,248Part number: A-4038-1028 : 厦门纪扬832 13 – OMP60M probe module adaptor6 – OMP60M LP2 adaptor Part number: A-4113-0771 : 厦门纪扬707Part number: A-4038-0212 : 厦门纪扬618 14 – MP3 probe Part number: A-2053-5358 7 – LPE3 150 mm extension : 厦门纪扬3,098Part number: A-2063-7003 : 厦门纪扬285 15 – Shorting cover Part number: A-2053-6468 8 – LPE2 100 mm extension : 厦门纪扬137Part number: A-2063-7002 : 厦门纪扬285 OMP60M upgrade kit9 – LPE1 50 mm extension : 厦门纪扬285 Current users of MP7, MP8, MP9 or MP10 opticalPart number: A-2063-7001 transmission probes may upgrade to OMP60M. A complete working probe must be exchanged.10 – MA4 90° adaptor Includes: OMP60M modulePart number: A-2063-7600 OMP60M probe module : 厦门纪扬464 Part number: RI-4038-1003 : 厦门纪扬2,422
RMP40 RMP40 is the latest generation of radio transmission part probes, ideal for use on small to medium machining centers. RMP40 features an integrated probe module delivering exceptional robustness and generous overtravel. RMP40 complies with FCC regulations and operates in the 2.4?GHz range. RMP40 delivers interference-free transmission through the use of FHSS (frequency hopping spread spectrum). RMP40 supports two methods of probe activation: Radio-on The probe is turned on via an RF signal produced by the RMI and initiated by an M code. The probe is turned off via an RF signal or the internal timer. Spin-on The probe is turned on via an internal centrifugal switch. The probe is turned off via the centrifugalMachine tool probes switch or the internal timer.2-12 Sense directions ±X, ±Y, +Z Stylus overtravel X and Y: ±12.5° Z: 6 mm (0.24 in) Stylus trigger force X and Y: 50 gf – 90 gf Unidirectional repeatability Z: 585 gf 1.0 μm (0.00004 in) RMP40 retrofit kit RMP40 probe kit Includes: RMP40 probe and transmission system Includes: RMP40 probe RMI radio machine interface ?AA battery (2) Receiver mounting bracket Tool kit 50 mm and 100 mm ceramic styli Sealtite kit Part number: A-5480-0001 : 厦门纪扬5,120 Renishaw Inspection Plus software Installation and applications support RMI radio machine interface A shank is not included in this kit. See section entitled Shanks Part number: A-4113-0050 : 厦门纪扬2,559 and Toolholders for and part number information. Part number: RMP40-NS-S (Available at a fixed ) Receiver mounting bracket Call for details Part number: A-2033-0830 Note: The retrofit questionnaire at the end of this section must be : 厦门纪扬119 filled out and returned to Renishaw before a retrofit order can be processed. Sealtite conduit RMP40 hardware only kit 5/16 in conduit, 1?m long. Includes one fitting. Includes: RMP40 probe and transmission system Part number: A-4113-0306 : 厦门纪扬27 RMI radio machine interface Receiver mounting bracket 50 mm and 100 mm ceramic styli Sealtite kit Part number: RMP40-NS-KIT : 厦门纪扬8,085
RMP60RMP60 is a radio transmission part probing system ideal for use on allmachine tools. RMP60 features an integrated probe module deliveringexceptional robustness and generous overtravel. RMP60 complies withFCC regulations and operates in the 2.4?GHz range. RMP60 deliversinterference-free transmission through the use of FHSS (frequencyhopping spread spectrum).RMP60 supports three methods of probe activation:Radio-on The probe is turned on via an RF signal produced by the RMI and initiated by an M code. The probe is turned off via an RF signal or the internal timer.Spin-on The probe is turned on via an internal centrifugal switch. The probe is turned off via the centrifugal switch or the internal timer.Switch-on The probe is turned on and off via a switch incorporated Machine tool probes into the shank, activated when the probe is loaded into the spindle.Sense directions ±X, ±Y, +Z RMP60 probe kit 2-13Stylus overtravel X and Y: ±18° Z: 11 mm (0.43 in) Includes: RMP60 probeStylus trigger force X and Y: 75 gf – 140 gf AA battery (2)Unidirectional repeatability Z: 530 gf Tool kit 1.0 μm (0.00004 in)RMP60 retrofit kit Part number: A-4113-0001 : 厦门纪扬5,120Includes: RMP60 probe and transmission system RMI radio machine interface RMI radio machine interface Receiver mounting bracket Part number: A-4113-0050 : 厦门纪扬2,559 50 mm and 100 mm ceramic styli Sealtite kit Receiver mounting bracket : 厦门纪扬119 Renishaw Inspection Plus software Part number: A-2033-0830 Installation and applications supportA shank is not included in this kit. See section entitled Shanks and Sealtite conduitToolholders for and part number information. 5/16 in conduit, 1?m long. Includes one fitting.Part number: RMP60-NS-S (Available at a fixed ) Part number: A-4113-0306 : 厦门纪扬27 Call for detailsNote: The retrofit questionnaire at the end of this section must be filled RMP60 upgrade kitout and returned to Renishaw before a retrofit order can be processed. Current users of MP14, MP16 or MP18 radio probesRMP60 hardware only kit may upgrade to RMP60. A complete working system (MP3 probe, transmission system, MI14 or MI16Includes: RMP60 probe and transmission system interface and RMM antennas) must be exchanged. RMI radio machine interface Receiver mounting bracket Includes: RMP60 probe 50 mm and 100 mm ceramic styli RMI radio machine interface Sealtite kit Receiver mounting bracket Sealtite kitPart number: RMP60-NS-KIT : 厦门纪扬8,085 Part number: RI-4113-0001 : 厦门纪扬5,200
RMP60M 3 7 11 4 6 RMP60M is a modular version of the RMP60. 5 The RMP60M, probe module, adaptors and 8 extensions need to be purchased separately. 9 RMP60 complies with FCC regulations and operates in the 2.4?GHz range. 10 1 2Machine tool probes 12 13 14 1 – RMP60M transmission module Part number: A-4113-1003 : 厦门纪扬2,499 152-14 2 – RMP60M probe module Part number: A-4038-1002 : 厦门纪扬3,056 11 – LP2 probe assembly Part number: A-2063-6098 3 – RMP60M 100?mm extension : 厦门纪扬2,961 Part number: A-4038-1010 : 厦门纪扬618 12 – RMP60M 3-way adaptor 4 – RMP60M 150?mm extension Part number: A-4113-0784 : 厦门纪扬1,248 Part number: A-4038-1027 : 厦门纪扬801 13 – RMP60M probe module adaptor 5 – RMP60M 200?mm extension Part number: A-4113-0771 : 厦门纪扬707 Part number: A-4038-1028 : 厦门纪扬832 14 – MP3 probe Part number: A-2053-5358 6 – RMP60M LP2 adaptor : 厦门纪扬3,098 Part number: A-4038-0212 : 厦门纪扬618 15 – Shorting cover Part number: A-2053-6468 7 – LPE3 150 mm extension : 厦门纪扬137 Part number: A-2063-7003 : 厦门纪扬285 RMP60M upgrade kit 8 – LPE2 100 mm extension : 厦门纪扬285 Current users of MP14, MP16 or MP18 radio probes may Part number: A-2063-7002 upgrade to RMP60M. A complete working system (probe, MI14 or MI16 interface and RMM antennas) must be exchanged. 9 – LPE1 50 mm extension : 厦门纪扬285 Includes: RMP60M module Part number: A-2063-7001 RMP60M probe module RMI radio machine interface 10 – MA4 90° adaptor Receiver mounting bracket Sealtite kit Part number: A-2063-7600 : 厦门纪扬464 Part number: RI-4113-1003 : 厦门纪扬5,720
RMP600RMP600 is the latest generation compact radio transmission probe usingstrain gage technology. Measuring only 63?mm in diameter and 76?mmin length, with an omni-directional transmission distance of 15?m, it isideal for use on all machine tools. RMP600 features an integrated probemodule delivering exceptional robustness and generous overtravel.It delivers interference-free transmission through the use of FHSS(frequency hopping spread spectrum). RMP600 complies with FCCregulations and operates in the 2.4?GHz range.RMP600 supports three methods of probe activation:Radio-on The probe is turned on via an RF signal produced by the RMI and initiated by an M code. The probe is turned off via an RF signal or the internal timer.Spin-on The probe is turned on via an internal centrifugal switch. The probe is turned off via the centrifugal switch or the internal timer. Machine tool probesSwitch-on The probe is turned on and off via a switch incorporated into the shank, activated when the probe is loaded into the spindle.Sense directions ±X, ±Y, +Z 2-15Stylus overtravel X and Y: ±15° Z: 11 mm (0.43 in) RMP600 probe kitStylus trigger force X and Y: 10 gfUnidirectional repeatability Z: 193 gf Includes: RMP600 probe 0.25 μm (0.00001 in) AA battery (2) Tool kitRMP600 retrofit kit Part number: A-5312-0001 : 厦门纪扬7,000Includes: RMP600 probe RMI radio machine interface RMI radio machine interface Receiver mounting bracket Part number: A-4113-0050 : 厦门纪扬2,559 50 mm and 100 mm carbon fiber styli Sealtite kit Receiver mounting bracket : 厦门纪扬119 Renishaw Inspection Plus software Part number: A-2033-0830 Installation and application supportA shank is not included in this kit. See section entitled Shanks and Sealtite conduitToolholders for and part number information. 5/16 in conduit, 1?m long. Includes one fitting.Part number: RMP600-NS-S (Available at a fixed ) Part number: A-4113-0306 : 厦门纪扬27 Call for detailsNote: The retrofit questionnaire at the end of this section must be filled RMP600 upgrade kitout and returned to Renishaw before a retrofit order can be processed. Current users of MP14, MP16 or MP18 radio probesRMP600 hardware only kit may upgrade to RMP600. A complete working system (MP3 probe, transmission system, MI14 or MI16Includes: RMP600 probe interface and RMM antennas) must be exchanged. RMI radio machine interface Receiver mounting bracket Includes: RMP600 probe 50 mm and 100 mm carbon fiber styli RMI radio machine interface Sealtite kit Receiver mounting bracket Sealtite kitPart number: RMP600-NS-KIT : 厦门纪扬10,032 Part number: RI-5312-0001 : 厦门纪扬6,440
Shanks and Toolholders Shanks for OMP40, OMP400 and RMP40 Part number Descrtption Shanks for OMP60, MP11, MP700, M-4071-0050 CAT30 厦门纪扬413 RMP60 and RMP600 (spin-on, 厦门纪扬368 optical-on, radio-on) systems M-4071-0058 CAT40 厦门纪扬368 厦门纪扬425 M-4071-0072 CAT50 厦门纪扬368 厦门纪扬368 M-4071-0049 BT30 厦门纪扬413 厦门纪扬395 Part number Descrtption M-4071-0057 BT40 厦门纪扬482 厦门纪扬482 M-2045-0068 CAT30 厦门纪扬368 M-4071-0071 BT50 厦门纪扬482 厦门纪扬368 厦门纪扬482 M-2045-0069 CAT40 厦门纪扬818 M-4071-0048 ISO30 DIN69871 厦门纪扬482 厦门纪扬368 厦门纪扬649 M-2045-0138 CAT45 厦门纪扬1,700 M-4071-0069 ISO40 DIN69871 厦门纪扬568 厦门纪扬368 厦门纪扬791 M-2045-0071 CAT50 厦门纪扬368 M-4071-0044 HSK E25 厦门纪扬822 厦门纪扬368 厦门纪扬822 M-2045-0292 CAT60 厦门纪扬368 M-4071-0055 HSK E32 厦门纪扬822 厦门纪扬693 M-2045-0077 BT30 厦门纪扬826 M-4071-0054 HSK E40 厦门纪扬887 M-2045-0027 BT40 厦门纪扬1,074 M-4071-0045 HSK A32 厦门纪扬1,077 M-2045-0038 BT45 厦门纪扬218 M-4071-0046 HSK A40 厦门纪扬218Machine tool probes M-2045-0073 BT50 厦门纪扬218 M-4071-0047 HSK A50 厦门纪扬750 M-2045-0186 HSK A40 厦门纪扬995 M-4071-0129 HSK A63 厦门纪扬676 M-2045-0187 HSK A50 厦门纪扬1,672 M-4071-0141 CAPTO C4 厦门纪扬1,388 M-2045-0188 HSK A63 厦门纪扬1,388 M-4071-0066 CAPTO C5 M-2045-0189 HSK A80 M-4071-0067 CAPTO C6 M-2045-0190 HSK A100 M-4071-0065 KM63 2-16 A-2045-0243 ? in straight shank A-2030-0252 1 in straight shank OMP40, OMP400 and RMP40 shank kits A-2030-0211 25 mm straight shank M-2045-0313 CAPTO C4 CAT40 shank kit M-2045-0346 CAPTO C5 Includes: CAT40 shank OMP60/RMP60 shank adaptor M-2045-0310 CAPTO C6 Part number: M-4071-0058-RI M-2045-0311 CAPTO C8 M-2045-0335 KM63 M-2045-1831591 KM63Y (Mazak) : 厦门纪扬539 Calibration masters BT40 shank kit Calibration tools Includes: BT40 shank OMP60/RMP60 shank adaptor Part number Descrtption : 厦门纪扬539 Part number: M-4071-0057-RI 厦门纪扬431 M-2253-0954 CAT40 厦门纪扬539 Shanks for OLP40 and RLP40 M-2253-0955 CAT50 厦门纪扬697 M-2253-1562 BT30 厦门纪扬431 Part number Descrtption M-2253-1263 BT40 厦门纪扬539 M-2253-1262 BT50 A-5625-1003 25 mm straight shank 厦门纪扬218 A-5625-1004 ? in straight shank 厦门纪扬218 A-5625-1007 1 in straight shank 厦门纪扬218
Tool setting probes for machining centersNC3 tool setterNC3 is a non-contact tool setter, available in a fixed configurationand offered in a single size. NC3 is compact and designed toaccommodate tools up to 80?mm diameter making it ideal forsmall to medium machining centers and special applications.Repeatability ±0.15 μm (0.000006 in)Tool diameter Min: 0.20 mm (0.008 in) Measurement Max: 80 mm (3.15 in) Off-center 100 mm (3.94 in) Breakage Min: 0.10 mm (0.0039 in)NC3 fixed system kit Machine tool probesIncludes: NC3 fixed unit with 10 m integral cable 2-17 NCi-5 interface Air regulator kit ?17 mm OD × 4 m conduit Mounting platePart number: A-4179-1100 : 厦门纪扬4,531NC3 fixed unit only NC3 air regulator kitIncludes: NC3 fixed unit with 10 m integral cable Part number: A-4179-1600 : 厦门纪扬443Part number: A-4179-1500 : 厦门纪扬3,631 NC3 air filter service kit Part number: P-FI01-S002 NC3 fixed system retrofit kit : 厦门纪扬147NC3 retrofit kit includes all items above plus the following: Steel sheath conduit Tool setting software ?17 mm OD × 1 m length, for cable protection. Installation and application supportPart number: NC3-F135-S : Call for details Part number: P-HO01-0008 : 厦门纪扬23NCi-5 interface 45° mounting bracketPart number: A-5259-2000 : 厦门纪扬226 Part number: A-4179-1501 : 厦门纪扬97 NC3 air nozzle kit Part number: A-4179-0450 : 厦门纪扬81
NC4 tool setter NC4 fixed kits NC4 is a non-contact tool setter and our most compact design. NC4 F300/225 with NCi-5 kit NC4 is available in fixed or separate configurations. NC4F (fixed) is available in four different sizes. NC4S (separate) systems are Separation 225 mm user-configurable operating between 500?mm and 5?m. Part number: NC4-F300-Modular-kit : 厦门纪扬4,781 Repeatability ±1.0 μm (0.00004 in) Minimum tool Measurement 0.03 mm (0.0012 in) NC4 F300/240 with NCi-5 kit diameter Breakage 0.03 mm (0.0012 in) Separation 240 mm Part number: NC4-F300-kit NC4 fixed system retrofit kits : 厦门纪扬4,781 Include: NC4 fixed unit with 12.5 m cable NC4 F230/170 with NCi-5 kit NCi-5 interface Air regulator kit Separation 170 mm ?22?mm OD steel braided conduitMachine tool probes Mounting plate Part number: NC4-F230-kit : 厦门纪扬4,781 Tool setting software Installation and application support NC4 F145/85 with NCi-5 kit Part numbers: NC4-F300-Modular-S * Separation 85 mm : 厦门纪扬4,781 NC4-F300-S * Part number: NC4-F145-kit NC4-F230-S *2-18 NC4-F145-S * NC4 F115/55 with NCi-5 kit NC4-F115-S * NC4-F95-S * Separation 55 mm : 厦门纪扬4,781 Part number: NC4-F115-kit NC4 separate system retrofit kits NC4 F95/23 with NCi-5 kit Include: NC4 separate unit with 12.5 m cable Separation 23 mm : 厦门纪扬4,781 NCi-5 interface Part number: NC4-F95-kit Air regulator kit ?17?mm OD steel braided conduit NC4 separate kits Tool setting software Installation and application support NC4 S800 with NCi-5 kit Part numbers: NC4-S800-S * Separation 500 mm – 800 mm : 厦门纪扬4,747 NC4-S1500-S * Part number: A-4114-5060 : 厦门纪扬4,747 NC4-S2000-S * : 厦门纪扬4,747 NC4-S3000-S * NC4 S1500 with NCi-5 kit : 厦门纪扬4,747 NC4-S5000-S * : 厦门纪扬4,747 Separation 800 mm – 1500 mm Note: When ordering a separate system retrofit kit, the customer Part number: A-4114-5065 must select an NC4 based on its operating range. In addition, the customer must select tool setting software based on the NC4 S2000 with NCi-5 kit control type. Brackets and an adjusting method (see following page) are also needed for NC4 separate systems. These Separation 1500 mm – 2000 mm are not included with NC4 separate systems and must be Part number: A-4114-5070 ordered additionally. Mounting brackets for various machines are continually developed. Contact Renishaw for the latest list NC4 S3000 with NCi-5 kit of compatibility. Bracket installation is not included with the standard separate system retrofit , this service can be Separation 2000 mm – 3000 mm quoted upon request. Part number: A-4114-5075 * Available at a fixed . Call for details. NC4 S5000 with NCi-5 kit Separation 3000 mm – 5000 mm Part number: A-4114-5080
NC4 tool kit : 厦门纪扬43 Steel sheath conduit 22 mm OD × 1 mPart number: A-4114-4110 : 厦门纪扬443NC4 air regulator kit : 厦门纪扬147 For NC4 fixed cable protection.Part number: A-2253-5120 : 厦门纪扬226NC4 air filter service kit Part number: P-HO01-0011 : 厦门纪扬23Part number: P-FI01-S002 : 厦门纪扬22NCi-5 interface : 厦门纪扬22 Steel sheath conduit 17 mm OD × 1 mPart number: A-5259-2000 : 厦门纪扬22NC4 access panel 0.2 For NC4 separate cable protection.Part number: A-4114-0082NC4 access panel 0.4 Part number: P-HO01-0008 : 厦门纪扬23Part number: A-4114-0084NC4 access panel 0.6 NC4F 90-degree cable exit kitPart number: A-4114-0086 Part number: P-CA61-0068 : 厦门纪扬22 Part number: P-CA61-0069 : 厦门纪扬22 NC4F air blast nozzle and bracket Machine tool probes Part number: A-5450-0480 : 厦门纪扬305 Solenoid kit : 厦门纪扬850 2-19 Part number: A-5450-0490NC4 set-up tool : 厦门纪扬342Part number: A-4114-8000NC4S mounting hardware options1. NC4 spacer plate – separate 2Part number: A-4114-4400 : 厦门纪扬1022. NC4 adjuster pack – separate 1Part number: A-4114-3100 : 厦门纪扬228
OTS The OTS is a new optical transmission tool setter for vertical and OTS ?AA horizontal machining centers. Modeled on the TS27R, OTS can set tool length and diameter of rotating tools and perform broken tool detection. OTS is available in two configurations – OTS ?AA and OTS AA. OTS can be used with the OMI?2, OMI?2T or OMM-2/OSI interface. OMI-2T or OMM-2/OSI must be used if OTS is to be paired with another optical transmission probe. Sense directions ±X, ±Y, +Z X and Y: ±10° Stylus overtravel Z: 5.5 mm (0.21 in) 130 gf – 240 gf Stylus trigger force 1.0 μm (0.00004 in) Unidirectional repeatabilityMachine tool probes OTS retrofit kit OTS AA2-20 Includes: OTS ?AA or OTS AA probe OMM-2 optical receiver OMI-2T Receiver mounting bracket Part number: A-5492-0051 : 厦门纪扬986 Sealtite kit Renishaw tool setting software OMI-2 optical receiver Installation and application support Part number: A-5191-0049 : 厦门纪扬1,582 Part number: OTS-S (?AA configuration) Part number: OTSAA-S (AA configuration) Available at fixed – call for details. Note: The retrofit questionnaire at the end of this section must be filled out and returned to Renishaw before a retrofit order can be processed. OTS hardware only kit OMI-2T optical receiver Includes: OTS ?AA probe or OTS AA probe Part number: A-5439-0049 : 厦门纪扬1,582 OMI-2T Receiver mounting bracket Receiver mounting bracket Sealtite kit Part number: A-2033-0830 : 厦门纪扬119 Part number: OTS-KIT : 厦门纪扬4,053 Part number: OTSAA-KIT : 厦门纪扬4,053 OTS ?AA probe kit OSI interface Includes: OTS probe Part number: A-5492-2000 : 厦门纪扬931 ? AA battery (2) Tool kit Sealtite conduit for OMM-2, OMI-2 or OMI-2T Part number: A-5401-2001 : 厦门纪扬2,271 5/16 in conduit, 1 m long. Includes one fitting. OTS AA probe kit Part number: A-4113-0306 : 厦门纪扬27 Includes: OTS probe AA battery (2) Tool kit Part number: A-5514-2001 : 厦门纪扬2,271
RTS (available winter 2013)The RTS is a radio transmission tool setter for vertical andhorizontal machining centers. Modeled after the OTS, RTS canset tool length and diameter of rotating tools and perform brokentool detection. RTS uses AA batteries (identical to RMP60). RTScan be used with either the RMI or the RMI-Q. The RMI-Q mustbe used if RTS is to be paired with another radio transmissionprobe.Sense directions ±X, ±Y, +Z X and Y: ±10°Stylus overtravel Z: 5.5 mm (0.21 in) 130 gf – 240 gfStylus trigger force 1.0 μm (0.00004 in)Unidirectional repeatabilityRTS retrofit kit RMI radio machine interface Machine tool probesIncludes: RTS AA probe Part number: A-4113-0050 : 厦门纪扬2,559 2-21 RMI-Q Receiver mounting bracket RMI-Q radio machine interface Sealtite kit Renishaw tool setting software Part number: A-5687-0050 : 厦门纪扬2,559 Installation and application support Receiver mounting bracketPart number: RTS-S Part number: A-2033-0830 : 厦门纪扬119Available at fixed – call for details. Sealtite conduitNote: The retrofit questionnaire at the end of this section mustbe filled out and returned to Renishaw before a retrofit order can 5/16 in conduit, 1 m long. Includes one fitting.be processed. Part number: A-4113-0306 : 厦门纪扬27RTS hardware only kitIncludes: RTS AA probe RMI-Q Receiver mounting bracket Sealtite kitPart number: RTS-KIT : 厦门纪扬5,711RTS AA probe kitIncludes: RTS probe AA battery (2) Tool kitPart number: A-5646-0001 : 厦门纪扬2,952
TS27R The TS27R is a tool setter for vertical machining centers that enables the user to set both tool length and diameter of rotating tools, and to carry out broken tool detection. Sense directions ±X, ±Y, +Z X and Y: ±10° Stylus overtravel Z: 5.5 mm (0.21 in) 130 gf – 240 gf Stylus trigger force 1.0 μm (0.00004 in) Unidirectional repeatability TS27R retrofit kit OTS, RTS or TS27R replacement parts and accessories Includes: TS27R probeMachine tool probes HSI interface Tungsten carbide stylus (0.5 in disk) Sealtite kit Renishaw toolsetting software Part number: A-2008-0382 : 厦门纪扬111 Installation and application support2-22 Part number: TS27R-S (Available at fixed ) Ceramic stylus (19 mm square) : 厦门纪扬130 Call for details Part number: A-2008-0384 Note: The retrofit questionnaire at the end of this section Retrofit stylus kit must be filled out and returned to Renishaw before a retrofit order can be processed. Includes: Break protection Tether TS27R hardware only kit Screws Includes: TS27R probe Part number: A-5003-5171 : 厦门纪扬35 HSI interface Sealtite kit Break protect link Part number: A-5003-0661 Part number: TS27R-KIT : 厦门纪扬1,402 : 厦门纪扬25 TS27R probe, stylus, and holder kit Stylus holder with 4 set screws : 厦门纪扬25 Part number: A-2008-0389 Part number: A-2008-0368 : 厦门纪扬1,136 Stylus holder set screws Part number: P-SC13-0403 HSI interface : 厦门纪扬1 Part number: A-5500-1000 : 厦门纪扬198 Crank for horizontal machining centers Part number: A-2008-0448 : 厦门纪扬120 100 mm riser : 厦门纪扬129 Part number: M-2008-0866-RI-KIT TS27 stylus (0.5 in disk) For TS27 probes shipped prior to July 1995. : 厦门纪扬111 : 厦门纪扬111 Part number: M-5003-1033 (steel) Part number: M-2008-0197 (ceramic)
TRS2TRS2 is a cost-effective laser-based solution for high-speedbroken tool detection. Working with the reflective propertiesof a rotating tool, TRS2 can detect broken tools at a distanceof between 300?mm and 2?m, but optimized for use between300?mm and 1?m. Toolwise? Electronics makes TRS2especially effective with tiny, easily broken tools down to0.019?in (0.5?mm) diameter. TRS2 is suitable for solid profiletools including drills, taps, reamers and end mills.TRS2 hardware kitIncludes: TRS2 laser system with integral interface Machine tool probes Tool kit Air regulator kit Sealtite kit Mounting bracket Renishaw TRS2 BTD softwarePart number: TRS2-KIT : 厦门纪扬2,600 TRS2 air regulator kit Part number: A-2253-5120 TRS2 probe only : 厦门纪扬443 2-23Includes: TRS2 laser system with integral interface TRS2 air filter service kitPart number: A-5450-0400 : 厦门纪扬2,008 Part number: P-FI01-S002 : 厦门纪扬147TRS2 retrofit kit Sealtite conduit for TRS2Includes: TRS2 laser system with integral interface ? in conduit, 5 ft long. Includes one fitting. Tool kit Air regulator kit Part number: SEALTITE, 7455 : 厦门纪扬23 Sealtite kit Mounting bracket TRS2 replacement air cap : 厦门纪扬26 Renishaw TRS2 BTD software Part number: A-4178-0440 Installation and application supportPart number: TRS2-S (Available at fixed ) Call for detailsSpecial pricing available for multiple systems.Note: The retrofit questionnaire at the end of this section mustbe filled out and returned to Renishaw before a retrofit order canbe processed.
TS34 TS34 is a hard-wired tool setter for vertical and horizontal machining centers that enables users to set both length and diameter of rotating tools and perform broken tool detection. Sense directions ±X, ±Y, +Z Stylus overtravel X and Y: ±9° Stylus trigger force Z: 4 mm (0.157 in) X and Y: 65 gf – 142 gf Unidirectional repeatability Z: 550 gf 1.0 μm (0.00004 in) TS34 probe, stylus and holder kitMachine tool probes Rear exit : 厦门纪扬3,364 Part number: A-2197-2100 2-24 Side exit : 厦门纪扬3,364 Part number: A-2197-3000 HSI interface : 厦门纪扬198 Part number: A-5500-1000
Inspection probes for turning centersOLP40OLP40 is the latest generation of optical transmission part probes,ideal for use on turning centers. OLP40’s compact design featuresan integrated probe module delivering exceptional robustness andgenerous overtravel. Utilizing a revised state-of-the-art modulatedoptical transmission method, the system offers the highest level ofresistance to light interference. The OLP40 probe is also backwardscompatible with existing OMM/MI12 and OMI receivers. OLP40supports two methods of probe activation – M code and spin-on.Sense directions ±X, ±Y, +Z Machine tool probesStylus overtravel X and Y: ±12.5° Z: 6 mm (0.24 in)Stylus trigger force X and Y: 50 gf – 90 gfUnidirectional repeatability Z: 585 gf 1.0 μm (0.00004 in)OLP40 retrofit kitIncludes: OLP40 probe and transmission system OMM optical receiver 2-25 OMI-2 optical machine interface Part number: A-2033-0576 Receiver mounting bracket : 厦门纪扬986 30 mm stainless steel stylus (×2) Sealtite kit OMM-2 optical receiver : 厦门纪扬986 Renishaw lathe inspection software Part number: A-5492-0051 Installation and applications supportA shank is not included in this kit. See section entitled Shanks and OMI-2 optical receiver/interfaceToolholders for and part number information.Part number: OLP40-NS-S (Available at fixed ) Part number: A-5191-0049 : 厦门纪扬1,582 Call for details OMI-2T optical receiver/interfaceNote: The retrofit questionnaire at the end of this section must befilled out and returned to us before a retrofit order can be processed. Part number: A-5439-0049 : 厦门纪扬1,582OLP40 hardware only kit Receiver mounting bracket Part number: A-2033-0830 Includes: OLP40 probe and transmission system : 厦门纪扬119 OMI-2 optical machine interface Receiver mounting bracket MI12 interface 30 mm stainless steel stylus (×2) Part number: A-2075-0142 : 厦门纪扬931 Sealtite kitPart number: OLP40-NS-KIT : 厦门纪扬5,725 OSI interface Part number: A-5492-2000 OLP40 probe kit : 厦门纪扬931Includes: OLP40 probe Sealtite conduit for OMM or OMI ? AA battery (2) Tool kit ? in conduit, 5 ft long. Includes one fitting.Legacy Part number: SEALTITE, 7455 : 厦门纪扬23Part number: A-5625-0001 : 厦门纪扬3,803 Sealtite conduit for OMM-2, OMI-2 or OMI-2T : 厦门纪扬3,803Modulated 5/16 in conduit, 1?meter long. Includes one fitting.Part number: A-5625-2001 Part number: A-4113-0306 : 厦门纪扬27
OMP40M 1 – OMP40M transmission module OMP40M is a modular version of the OLP40. The LP2 probe Legacy module, adaptors and extensions need to be purchased separately. Part number: A-5626-0001 : 厦门纪扬1,320 Modulated Part number: A-5626-2001 : 厦门纪扬1,320 2 2 – LPE3 extension 150 mm 3 Part number: A-2063-7003 : 厦门纪扬285 14 3 – LPE2 extension 100 mm 6 Part number: A-2063-7002 : 厦门纪扬285 OMP 40M 43798 4 – LPE1 extension 50 mm 5Machine tool probes Part number: A-2063-7001 : 厦门纪扬285 5 – MA4 90° adaptor Part number: A-2063-7600 : 厦门纪扬464 6 – LP2 probe assembly2-26 Part number: A-2063-6098 : 厦门纪扬2,961 OMP40M retrofit kit OMI-2 optical receiver/interface Includes: OMP40M transmission system Part number: A-5191-0049 : 厦门纪扬1,582 LP2 probe OMI-2 optical machine interface OMI-2T optical receiver/interface Receiver mounting bracket 30 mm stainless steel stylus (×2) Part number: A-5439-0049 : 厦门纪扬1,582 Sealtite kit Renishaw lathe inspection software Receiver mounting bracket : 厦门纪扬119 Installation and applications support Part number: A-2033-0830 Part number: OMP40M-NS-S (Available at fixed ) MI12 interface Call for details Part number: A-2075-0142 : 厦门纪扬931 OMP40M hardware only kit Includes: OMP40 transmission system OSI interface : 厦门纪扬931 LP2 probe Part number: A-5492-2000 OMI-2 optical machine interface Receiver mounting bracket Sealtite conduit for OMM or OMI 30 mm stainless steel stylus (×2) Sealtite kit ? in conduit, 5 ft long. Includes one fitting. Part number: OMP40M-NS-KIT : 厦门纪扬6,203 Part number: SEALTITE, 7455 : 厦门纪扬23 A shank is not included in the above kits. See section entitled Sealtite conduit for OMM-2, OMI-2 or OMI?2T Shanks and Toolholders for and part number information. OMM optical receiver 5/16 in conduit, 1?meter long. Includes one fitting. Part number: A-2033-0576 : 厦门纪扬986 Part number: A-4113-0306 : 厦门纪扬27 OMM-2 optical receiver : 厦门纪扬986 Part number: A-5492-0051
RLP40RLP40 is the latest generation of radio transmission partprobes, ideal for use on turning centers. RLP40’s compactdesign features an integrated probe module deliveringexceptional robustness and generous overtravel. RLP40complies with FCC regulations and operates in the 2.4 Ghzrange. RLP40 delivers interference-free transmissionthrough the use of FHSS (frequency hopping spreadspectrum).RLP40 supports two methods of probe activation:Radio-on The probe is turned on via an RF signal produced by the RMI and initiated by an M code. The probe is turned off via an RF signal or the internal timer.Spin-on The probe is turned on via an internal centrifugal Machine tool probes switch. The probe is turned off via the centrifugal switch or the internal timer.Sense directions ±X, ±Y, +Z 2-27Stylus overtravel X and Y: ±12.5° Z: 6 mm (0.24 in)Stylus trigger force X and Y: 50 gf – 90 gfUnidirectional repeatability Z: 585 gf 1.0 μm (0.00004 in)RLP40 retrofit kit RLP40 probe kitIncludes: RLP40 probe and transmission system Includes: RLP40 probe RMI radio machine interface ? AA battery (2) Receiver mounting bracket Tool kit 30 mm stainless steel stylus (×2) Sealtite kit Part number: A-5627-0001 : 厦门纪扬4,600 Renishaw lathe inspection software Installation and applications support RMI radio machine interfaceA shank is not included in this kit. See section entitled Part number: A-4113-0050 : 厦门纪扬2,559Shanks and Toolholders for and part numberinformation. Receiver mounting bracket Part number: A-2033-0830 Part number: RLP40-NS-S (Available at fixed ) : 厦门纪扬119 Call for detailsNote: The retrofit questionnaire at the end of this section Sealtite conduitmust be filled out and returned to Renishaw before a retrofitorder can be processed. 5/16 in conduit, 1?m long. Includes one fitting. Part number: A-4113-0306 : 厦门纪扬27RLP40 hardware only kitIncludes: RLP40 probe and transmission system RMI radio machine interface Receiver mounting bracket 30 mm stainless steel stylus (×2) Sealtite kitPart number: RLP40-NS-KIT : 厦门纪扬7,499
RMP40M 1 – RMP40M transmission module RMP40M is a modular version of the RLP40. The LP2 probe Part number: A-5628-0001 : 厦门纪扬2,000 module, adaptors and extensions need to be purchased separately. 2 – LPE3 extension 150 mm 2 Part number: A-2063-7003 : 厦门纪扬285 3 – LPE2 extension 100 mm 3 Part number: A-2063-7002 : 厦门纪扬285 1 4 – LPE1 extension 50 mm 4 6 Part number: A-2063-7001 : 厦门纪扬285 RMP 40M 5 – MA4 90° adaptor 43798 5 Part number: A-2063-7600 : 厦门纪扬464Machine tool probes 6 – LP2 probe assembly Part number: A-2063-6098 : 厦门纪扬2,9612-28 RMP40M retrofit kit RMI radio machine interface Includes: RMP40M transmission system Part number: A-4113-0050 : 厦门纪扬2,559 LP2 probe Receiver radio machine interface Receiver mounting bracket : 厦门纪扬119 Receiver mounting bracket Part number: A-2033-0830 30 mm stainless steel stylus (×2) Sealtite kit Sealtite conduit Renishaw lathe inspection software Installation and applications support 5/16 in conduit, 1?m long. Includes one fitting. Part number: RMP40M-NS-S (Available at fixed ) Part number: A-4113-0306 : 厦门纪扬27 Call for details RMP40M hardware only kit Includes: RMP40 transmission system LP2 probe RMI radio machine interface Receiver mounting bracket 30 mm stainless steel stylus (×2) Sealtite kit Part number: RMP40M-NS-KIT : 厦门纪扬7,860 A shank is not included in the above kits. See section entitled Shanks and Toolholders for and part number information.
LP2The LP2 probe is used on CNC lathes for workpiece inspection and toolsetting. It is also used in special applications where its small body makes itsuitable for gaging workpiece features with restricted access.The LP2 is universal and can be fitted to optical, inductive, hard-wired andradio transmission systems. An array of sockets and adaptors is available tosupport these applications. Please contact Renishaw for further details.Sense directions ±X, ±Y, +ZStylus overtravel X and Y: ±12.5° Z: 6.5 mm (0.25 in)Stylus trigger force X and Y: 50 gf – 90 gfUnidirectional repeatability Z: 585 gf 1.0 μm (0.00004 in)Includes: LP2 probe Machine tool probes 2 C spanners TK1 tool kitPart number: A-2063-6098 : 厦门纪扬2,961LP2H 2-29The LP2H probe is used on CNC lathes for workpiece inspection and toolsetting. It is designed for heavier duty applications where machine vibration orheavy stylus arrangements may cause unexpected triggers.Sense directions ±X, ±Y, +ZStylus overtravel X and Y: ±12.5° Z: 5 mm (0.20 in)Stylus trigger force X and Y: 200 gf – 400 gfUnidirectional repeatability Z: 3000 gf 2.0 μm (0.00008 in)Includes: LP2H probe 2 C spanners TK1 tool kitPart number: A-2064-0002 : 厦门纪扬2,961LP2DDThe LP2DD probe is based on the LP2 design, but incorporates a reviseddiaphragm assembly. This probe is recommended for grinding machines andother installations where dust-filled coolant is abundant.Sense directions ±X, ±Y, +ZStylus overtravel X and Y: ±15° Z: 6.5 mm (0.25 in)Stylus trigger force X and Y: 50 gf – 90 gfUnidirectional repeatability Z: 585 gf 1.0 μm (0.00004 in)Includes: LP2DD probe 2 C spanners TK1 tool kitPart number: A-2063-8020 : 厦门纪扬2,961
LP2/LP2DD replacement parts Conversion kit This kit allows the conversion of your existing LP2 probe to LP2DD. Includes: 2 C spanners Front ring Outer diapragm O ring Part number: A-2063-8023 : 厦门纪扬165Machine tool probes LP2DD diaphragm replacement kit An outer diaphragm replacement kit for the LP2DD. Includes: Diaphragm O ring Part number: A-2063-8030 : 厦门纪扬402-30 Chip deflector This deflector is recommended if the LP2DD is subjected to continual exposure to hot chips. Part number: M-2063-8003 : 厦门纪扬40 C spanner A C spanner is required for fitting an LP2 to your machine. Part number: A-2063-7587 : 厦门纪扬17 LP2 service kit (DK2) : 厦门纪扬75 Includes: Front cap Metal eyelid Spring O ring Part number: A-2063-7542 TK1 tool kit Includes: Stylus tool 1.5 mm A/F hex key 2.0 mm A/F hex key 2.5 mm A/F hex key 3.0 mm A/F hex key 4.0 mm A/F hex key Part number: A-2053-7531 : 厦门纪扬36
LP2 accessories LPE1 extensionFS1 adjustable female socket A 50 mm long extension which can be fitted between the LP2 and holder.Provdies ±4° of angular rotation about the centerline ofthe LP2. Supplied with 500 mm long cable, protective Part number: A-2063-7001 : 厦门纪扬285cover and adjusting screws. LPE2 extensionPart number: A-2063-6697 : 厦门纪扬136 100 mm long.FS2 fixed female socket : 厦门纪扬285 Part number: A-2063-7002 Designed for rigid mounting of an LP2. Supplied with500 mm long cable and protective cover. LPE3 extensionPart number: A-2063-5431 : 厦门纪扬136 150 mm long Part number: A-2063-7003 : 厦门纪扬285 Machine tool probesFS3 single axis adjustable holder LP2 straight shanksThe socket pivots on two balls, this provides ±4° of pitch LP2 straight shanks are fitted with FS2 socketadjustment about the centerline of the LP2. Supplied assemblies to accommodate the LP2 probe. An MI8with 500 mm long cable, protective cover and adjusting interface is also required.screws.Part number: A-2063-5308 : 厦门纪扬238 2-31MA4 90° adaptor LP2 0.75 in straight shank with FS2 andPart number: A-2063-7600 cable assembly : 厦门纪扬464 Part number: A-2063-8326 : 厦门纪扬1,223COS to LP2 adaptor LP2 1 in straight shank with FS2 and cable assemblyThis adaptor allows the use of the LP2 on the MP7/MP8/MP9/MP10 OMP. Part number: A-2063-8328 : 厦门纪扬1,223Part number: A-2063-7774 : 厦门纪扬603 LP2 22 mm straight shank with FS2 and cable assemblyIMP inductive modulePart number: A-2028-7574 : 厦门纪扬623 Part number: A-2063-8366 : 厦门纪扬1,223MI5 interface : 厦门纪扬583Part number: A-2019-0006 MI8 interface : 厦门纪扬198Part number: A-2037-0010
MP250 MP250 is the next generation compact probe. Measuring just 25?mm in diameter and 40?mm in length, MP250 is identical in size to the popular LP2. MP250 uses Rengage? strain gage sensing technology and delivers superior metrology performance. MP250 is aimed at the tool cutter grinder and special CNC lathe markets. MP250 is supported via hard-wired only and must be used with the HSI interface and FS sockets designed specifically for the MP250. MP250 is not suitable for use with inductive, optical or radio transmission.Machine tool probes Sense directions ±X, ±Y, +Z Stylus overtravel X and Y: ±15° Z: 6.5 mm (0.25 in) Stylus trigger force X and Y: 11 gf Unidirectional repeatability Z: 220 gf 0.25 μm (0.00001 in)2-32 MP250 probe kit Includes: MP250 probe : 厦门纪扬4,420 Tool kit Part number: A-5500-1600 MP250 accessories FS1 adjustable female socket for MP250 Part number: A-5500-1710 : 厦门纪扬226 FS2 fixed female socket for MP250 Part number: A-5500-1810 : 厦门纪扬226 HSI interface for MP250 : 厦门纪扬198 Part number: A-5500-1000
Tool setting for turning centersHigh precision removable arm (HPRA) TSi2 interfaceThe HPRA is a ‘plug-in’, cost effective, precision tool setting systemfor use on CNC lathes. When needed, the arm is manually introduced CNC machine controllerto the machine envelope and held in place through the use of themachine resident HPRA base. The arm is locked in position through Stylusthe duration of the tool setting cycle. After use, the arm is removed andstored on the HPRA storage stand.Unidirectional repeatability RP3 StandMax 2 sigma value: 5.0 μm (0.0002 in) for arms Base Machine tool probesMax arm dimensions: supporting 6 in to 15 in chucks HPRAMin arm dimensions: 8.0 μm (0.0003 in) for arms supporting 18 in to 24 in chucks A=580 mm B=450 mm A=250 mm B=211 mmHPRA is available to fit most common chuck sizes from 6 in to 24?in.Each HPRA standard kit (see below) is supplied complete with:? RP3 probe (A-2197-0049) 2-33? 90° probe holder? TSi2 interface (A-2176-0010)? HPRA storage stand (A-2176-0019)Standard kitsPart number: See below : 厦门纪扬3,538** A stylus assembly and base (R/E or S/E) rear exit or side exit are notincluded and must be ordered separately.Part descrtption Part number A-dimension B-dimensionHPRA 6 in chuck with RP3 kit HPRA 8 in chuck with RP3 kit A-2176-0883 250 211HPRA 10 in chuck with RP3 kit HPRA 12 in chuck with RP3 kit A-2176-0884 280 241HPRA 15 in chuck with RP3 kit HPRA 18 in chuck with RP3 kit A-2176-0885 325 290HPRA 24 in chuck with RP3 kit A-2176-0886 355 290 A-2176-0887 455 335 A-2176-0888 510 375 A-2176-0889 580 450Custom kitsThe HPRA can also be designed for specific applications. The customer 3must specify arm length, probe holder, stylus configuration etc. The 9items below depict some of the options. Please contact Renishaw forpricing.1 A-2176-0268 PCB/LED housing 1 22 A-2176-0018 90° holder fixed 63 A-2176-0257 I/L holder fixed 84 A-2048-0523 LP2 adaptor 75 A-2176-1291 I/L adj RP3 holder6 A-2176-1290 30° adj RP3 holder 57 A-2176-0269 45° adj RP3 holder 48 A-2176-1289 60° adj RP3 holder9 A-2176-1288 90° adj RP3 holder
HPRA bases The HPRA base is designed to provide a repeatable location for fixing the HPRA arm during tool setting cycles. The base is designed to stay resident within the machine and is supplied with a cover to protect the unit from coolant and debris when the arm is not in use. HPRA bases are available in rear and side exit configurations and are supplied with 3 meters of cable. HPRA rear exit base Part number: A-2176-0025 : 厦门纪扬748 HPRA side exit base Part number: A-2176-0187 : 厦门纪扬748Machine tool probes HPRA storage stand : 厦门纪扬297 Part number: A-2176-0019 2-34 HPRA/HPPA/HPMA stylus kits There are six primary configurations of styli to support HPRA. Each is designed Stylus to be compatible with standard sizes of block tooling ranging from 5/8 in to 2 in. assembly Each stylus kit is supplied complete with: ? 15×15×4 stylus assembly ? Break stem ? Stylus extension/adaptor ? Screws and tool kit Part number: A-2197-0157 (16 mm tooling) : 厦门纪扬116 Break Part number: A-2197-0158 (20 mm tooling) : 厦门纪扬116 stem Part number: A-2197-0159 (25 mm tooling) : 厦门纪扬116 Part number: A-2197-0160 (32 mm tooling) : 厦门纪扬116 Part number: A-2197-0161 (40 mm tooling) : 厦门纪扬116 Part number: A-2197-0162 (50 mm tooling) : 厦门纪扬116 HPRA/HPPA/HPMA break stems : 厦门纪扬25 : 厦门纪扬25 Part number: M-2197-0156 (16 and 20 mm tooling) Part number: M-2197-0150 (25 to 50 mm tooling)
High precision pull-down arm Machine tool probes(HPPA)High precision motorized arm(HPMA)The HPPA is a manual ‘pull-down’ ‘push-up’ tool setting systemfor use on CNC lathes. The HPMA is an ‘automatic’ servo drivensystem. Both products are designed to permanently reside in themachine envelope.When needed, the HPPA is manually ‘pulled-down’ into position.After use, the arm is ‘pushed-up’ away from the cutting volume.HPMA requires the use of CNC M codes to drive the arm to itsactive and stowed positions.All HPPA and HPMA systems are supplied with an enclosure toprotect the probe and stylus assembly when not in use. HPPA andHPMA hubs are available in both R/E (rear exit ) and S/E (sideexit) configurations. S/E hubs are supplied with a fixed 5?m cable.R/E hubs are supplied with a bulkhead connector and requirethe purchase of a separate cable.Specifications CNC machine controller 2-35Unidirectional repeatabilitymax 2σ value in machine XZ axis: 5.0 μm (0.0002 in) for arms Probe enclosure supporting 6 in to 15 in chucks Stylus RP3 8.0 μm (0.0003 in) for arms TSi2 or TSi3 A-2197-0004 interface supporting 18 in to 24 in chucks CableHPPA max arm dimensions: A=555 mm B=458 mm HPPA/ HPMAHPPA min arm dimensions: A=250 mm B=219?mm hubHPMA max arm dimensions: A=555 mm B=458 mmHPMA min arm dimensions: A=250 mm B=219?mmHPPA and HPMA are available to fit most common chuck sizes HPPAfrom 6 in to 24 in. Each ‘standard’ kit (see below) is suppliedcomplete with:? Arm? HPPA or HPMA hub? RP3 probe (A-2197-0049)? 90° probe holder? TSi2 interface for HPPA (A-2176-0010)? TSi3 interface for HPMA (A-2181-0465)? Probe enclosure (A-2275-0098)? Cable (supplied with S/E systems only, purchase separately for R/E systems)
HPPA standard kits Part number: See below : 厦门纪扬4,181* * A stylus assembly is not included and must be ordered separately. In addition HPPA and HPMA R/E systems require the separate purchase of a cable. Part descrtption Part number A-dimension B-dimensionMachine tool probes HPPA 6 in R/E with RP3 kit A-2275-0181 250 219 A HPPA 8 in R/E with RP3 kit A-2275-0182 286 249 B HPPA 10 in R/E with RP3 kit A-2275-0183 335 298 HPPA 12 in R/E with RP3 kit A-2275-0184 368 298 2 HPPA 15 in R/E with RP3 kit A-2275-0185 400 343 8 HPPA 18 in R/E with RP3 kit A-2275-0186 469 383 HPPA 24 in R/E with RP3 kit A-2275-0187 555 458 7 HPPA 6 in S/E with RP3 kit A-2275-0188 250 219 HPPA 8 in S/E with RP3 kit A-2275-0189 286 249 HPPA 10 in S/E with RP3 kit A-2275-0190 335 298 HPPA 12 in S/E with RP3 kit A-2275-0191 368 298 HPPA 15 in S/E with RP3 kit A-2275-0192 400 343 HPPA 18 in S/E with RP3 kit A-2275-0193 469 383 HPPA 24 in S/E with RP3 kit A-2275-0194 555 4582-36 HPMA standard kits Part number: See below : 厦门纪扬4,718 Part descrtption Part number A-dimension B-dimension HPMA 6 in R/E with RP3 kit A-2181-0645 250 219 HPMA 8 in R/E with RP3 kit A-2181-0646 286 249 HPMA 10 in R/E with RP3 kit A-2181-0647 355 298 HPMA 12 in R/E with RP3 kit A-2181-0648 368 298 HPMA 15 in R/E with RP3 kit A-2181-0649 400 343 HPMA 18 in R/E with RP3 kit A-2181-0650 469 383 HPMA 24 in R/E with RP3 kit A-2181-0651 555 458 HPMA 6 in S/E with RP3 kit A-2181-0652 250 219 HPMA 8 in S/E with RP3 kit A-2181-0653 286 249 HPMA 10 in S/E with RP3 kit A-2181-0654 355 298 HPMA 12 in S/E with RP3 kit A-2181-0655 368 298 HPMA 15 in S/E with RP3 kit A-2181-0656 400 343 HPMA 18 in S/E with RP3 kit A-2181-0657 469 383 HPMA 24 in S/E with RP3 kit A-2181-0658 555 458 Custom kits The HPPA and HPMA can also be designed for specific applications. The customer 3 must specify arm length, probe holder, stylus configuration, hub type etc. The items 9 below depict some of the options. Please contact Renishaw for pricing. 1 A-2176-0268 PCB/LED housing 5 1 2 A-2176-0018 90° holder fixed 4 6 3 A-2176-0257 I/L holder fixed 4 A-2048-0523 LP2 adaptor 5 A-2176-1291 I/L adj RP3 holder 6 A-2176-1290 30° adj RP3 holder 7 A-2176-0269 45° adj RP3 holder 8 A-2176-1289 60° adj RP3 holder 9 A-2176-1288 90° adj RP3 holder
HPPA/HPMA cablesThe HPPA and HPMA R/E systems require the use of one of the cables below:Part number: P-CA82-1010 (2 meters) : 厦门纪扬32Part number: P-CA82-1009 (5 meters) : 厦门纪扬52Part number: P-CA82-1011 (10 meters) : 厦门纪扬73HPRA/HPPA/HPMA stylus kits Stylus Machine tool probes assemblyThere are six primary configurations of styli to support HPPA and HPMA. Each isdesigned to be compatible with standard sizes of block tooling ranging from5/8 in to 2 in. Each stylus kit is supplied complete with:? 15×15×4 stylus assembly? Break stem? Stylus extension/adaptor? Screws and tool kitPart number: A-2197-0157 (16 mm tooling) : 厦门纪扬116 BreakPart number: A-2197-0158 (20 mm tooling) : 厦门纪扬116 stemPart number: A-2197-0159 (25 mm tooling) : 厦门纪扬116Part number: A-2197-0160 (32 mm tooling) : 厦门纪扬116 2-37Part number: A-2197-0161 (40 mm tooling) : 厦门纪扬116Part number: A-2197-0162 (50 mm tooling) : 厦门纪扬116HPRA/HPPA/HPMA M4 break stems : 厦门纪扬25 : 厦门纪扬25Part number: M-2197-0156 (16 mm and 20 mm tooling) : 厦门纪扬25Part number: M-2197-0150 (25 mm to 50 mm tooling) Part number: M-2048-2093 (Mori Seiki) Legacy HPA stylus kitsTS20 replacement stylus kitIncludes stylus 10×10×4, break protect link, adaptor and screw.Part number: A-2008-0601 (25?mm tooling) : 厦门纪扬116Part number: A-2008-0602 (32?mm tooling) : 厦门纪扬116Part number: A-2008-0603 (40?mm tooling) : 厦门纪扬116TS20 break protect link : 厦门纪扬25 : 厦门纪扬25Part number: M-2008-0333 (25?mm tooling) : 厦门纪扬25Part number: M-2008-0604 (32?mm tooling) Part number: M-2008-0605 (40?mm tooling)
RP1, RP2 and RP3 tool setting probes The RP1, RP2 and RP3 probes are suitable for OEM installation into purpose- built holders, or for use with Renishaw’s automatic or manual tool setting arms. RP1 – Tool setting/inspection probe and tool kit For use on OEM installation into purpose-built holders. Part number: A-2154-0007 : 厦门纪扬1,470Machine tool probes RP1 DD – RP1 double diaphragm version and tool kit For use on OEM installation into purpose-built holders. Part number: A-2154-0008 : 厦门纪扬1,4702-38 RP2 – Probe for tool setting arm (TSA) only Part number: A-2116-0149 : 厦门纪扬1,470 RP2DD – RP2 double diaphragm version for TSA only Part number: A-2116-0150 : 厦门纪扬1,470 RP3 – Probe for HPRA, HPPA and HPMA arms Part number: A-2197-0049 : 厦门纪扬1,470
InterfacesMI5 interfaceThe MI5 interface is required for use with Renishaw’s inductivetransmission probe systems. The MI5 converts probe signals into anacceptable form for the CNC machine control. This interface has solidstate relay outputs.Part number: A-2019-0006 : 厦门纪扬583MI5 board only (SSR)Part number: A-2084-0500 : 厦门纪扬498MI12 interface Machine tool probesThe MI12 interface is required for use with Renishaw optical probesusing Legacy transmission. The MI12 converts signals received fromthe OMM receiver into an acceptable form for the CNC machinecontrol. This interface has solid state relay outputs.Part number: A-2075-0142 : 厦门纪扬931 2-39MI12 board only (SSR)Part number: A-2075-0141 : 厦门纪扬798OSI interfaceThe OSI interface is required for use with Renishaw optical probesusing Modulated transmission. The OSI works exclusively with theOMM-2 receiver.Part number: A-5492-2000 : 厦门纪扬931HSI interfaceThe HSI interface is required for use with Renishaw’s MP250 andTS34 probes. The HSI converts signals received from the probe into anacceptable form for the CNC machine control. The HSI has solid staterelay output.Part number: A-5500-1000 : 厦门纪扬198NCi-5 interfaceAn NCi-5 interface is required for use with Renishaw non-contacttool setting systems. The interface converts probe signals into anacceptable form for the CNC machine control. This interface has solidstate relay outputs.Part number: A-5259-2000 : 厦门纪扬226
CMD10018
Комплект подкладок для юстировки эл. двигателя
Shim motor
5929-0101-10
Воздушный фильтр 1 ст SM3000-7000, TMX/Y/Z (старый код CST71001-02,9100203040)
Inlet Filter 1st
5929-0101-20
Воздушный фильтр 2 ст SM3000-7000, TMX/Y/Z (старый код CST71002-02, 9100203041) AE
Inlet Filter 2st
932691Q 10Q YL
Масляный фильтроэлемент TM1250 Parker (заменён на CST45003-03)
Oil filterelement
CAA26000-ASK01
Ремкомплект промежуточного теплообменника TMA/X (земенён на AM10-000633A)
Inter cooler repair
CMA11001-06*
Реле SZR-MY4-N1 TM1250
Relay SZR-MY4-N1
CMD10048
Сепаратор TMX/Y/Z, SM2000-6000, SA2000 01.14 старый код CMA10139
Separator
CST65001
Подшипники IGV TM1250
BEARING
CST45027-01
Масляный фильтроэлемент для CST45027-G01 01.14
Oil filterelement
CST51301-G04
Трансмиттер вибрации (5 м) SHIN
transmitter vibratio
CST51311-G02
Датчик вибрации (старый код CST51311-05)
probe vibration
CST51321-G06
Кабель вибрации (5 м) SHIN (old EP07-000241,CST51321-G04,CST51321-05)
Cable vibration
CST71005
Воздушный фильтр SM3000-6000 01.14 (old CST71003,9100203013)
Inlet filterelement
CAA12403-TL
Подшипник #1 TM900-1500 старый код CAA12403-00-DS
BEARING
CAFV12410
Воздушный уплотнитель #1 TM1000-1500
AIR SEAL ASSY
CST55907-01
Модуль ввода NX-X RTD8
RTD INPUT MODULE
MCX10000-13*
Масляный сальник двигателя Hyundai
Motor oil seal
CST71003
Воздушный фильтр SM3000-6000 (заменён на CST71005)
Inlet filterelement
CMA00490
Ремкомплект масляного кулера SM4000/5000 (заменён на CMA00490NEW + 2x9100201021)
Oil cooler repair
AM10-000640A
Ремкомплект для трех промежуточных теплообменников SM5000 (3xCMA00487)
Inter cooler repair
CBFR24000-SK01
Ремкомплект масляного кулера TMX/Y/Z
Oil cooler repair
CST45003-03
Масляный фильтроэлемент для CST45003-G03 (старый номер CST45003-01)
Oil filterelement
CMA00489
Ремкомплект масляного кулера SM6000 (заменён на CMA00490NEW + 2x9100201124)
Oil cooler repair
CMA00488
Ремкомплект промежуточного теплообменника SM6000 Нужно 3 шт замена на AM10-000641A
Inter cooler repair
CBA25002-ASK01
Ремкомплект промежуточного теплообменника TM800 Нужно 3 шт (замена на AM10-000634A)
Inter cooler repair
CST45010-05
Редуктор инжекторов TMX/Y/Z, SM2000-6000, SA2000 (заменен на HP09-000227)
OIL MIST REGULATOR
CST13023-01
Резиновое уплотнение (6'') (старый код CST13043-01)
v-joint rubber (6'')
CST13024-01
Резиновое уплотнение (8'') (старый код CST13044-01)
v-joint rubber (8'')
CST13025-01
Резиновое уплотнение (10'') (старый код CST13045-01)
v-joint rubber (10")
CST45011-G11
Вспомогательный маслонасос TMX/Y/Z старый номер CST45011-04
auxiliary oil pump
5945S1000048-02
Вентилятор охлаждения электрошкафа
Cooling fan
CST51211-G02
Датчик температуры (75mm) TE231,TE101
RTD Sensor
CST45004-G02
Подогреватель масла 4 кВт, 380 В
Oil heater
CAFU65000-G02*
Дроссельная заслонка всаса (IGV)
IGV ASSY (Electric)
CST66001-G03
Привод дроссельной заслонки всаса TM, SM3000-6000 (old CST66001-03)
IGV Actuator ASS'Y
CST85502-G23
Помпажный клапан позиционер 4" TMX
BOV positioner
FAN/MOTOR ASSY*
Вентилятор охлаждения электродвигателя
FAN/MOTOR ASS'Y
CST52131-01
Манометр разряжения
manometer
CMA10600-G01*
Полюс вакумного выключателя VCB ABB, VD4, CONTACT ARM
CONTACT ARM
CAFV25000-G02
Вставка теплообменника #1 ТМX (CU FIN) (старый код CAFV21000-G02,CAA26000)
INTERCOOLER
CAFV26000-G01
Вставка теплообменника #2 TMX, ТМ 1500 (Савинский) (AL FIN)(старый код CAFV22000-G01,CAA25000)
INTERCOOLER
CST13007
Кламп 1" TMX/Y
Groove joint
CST55902-03
Модуль CPU NX-CPU700P
MODULE CPU
CST55903-04
Модуль цифрового вывода NX-Y16R
NX MODULE
CST55904-03
Модуль цифрового ввода NX-X16D
NX MODULE
CST55906-03
Модуль аналогового ввода NX-AI8C
NX MODULE
CST55907-02
Модуль ввода NX-RTD8
RTD INPUT MODULE
CST55905-02
Модуль аналогового вывода NX-A04C (4-20 mA)
NX MODULE
5945S1100048
Конденсатор привода VCB (старый EP07-000241)
Condens trip device
CST55951-13
Сенсорный экран Touch screen 10,4" (Siemens TP270)
Touch screen
CMA00486
Ремкомплект промежуточного теплообменника SM4000 Нужно 3 шт замена на AM10-000639A
Inter cooler repair
9100203013
Воздушный фильтр SM3000-6000 (заменён на CST71005)
Inlet filterelement
SM1500-B03
Набор уплотнений SM 5000
GASKET SET
5945S1000036
Конденсатор IGV (заменён на 5945S1000043)
IGV condensor
TMW2250-D03
Набор О-прокладок главного редуктора SM 6000
O-ring set
TMW2250-B03
Набор уплотнений SM 6000
GASKET SET
CST45009-03
Резиновая вставка муфты CST45007
rubber coupling mop
CST55903-06
NX: PLC Батарея питания
PLC Battery
CST45003-G03
Сдвоенный масляный фильтр в сборе Parker SM5000-6000 (старый номер 9100203018-G03)
Oil filter ASS'Y
CAA26002-ASK01*
Ремкомплект промежуточного и концевого охладителей TM1500 (заменён на AM10-000633A)
Inter cooler repair
CST85211-05
Фильтр редуктора клапана BOV TMX/Y/Z, TM1500
BOV air regulator
SM0900-D03
Набор O-прокладок охладителя SM 4000
O-ring set
CAA26001-ASK01
Ремкомплект промежуточного и концевого охладителей TM1500 (заменён на AM10-000633A)
Inter cooler repair
CMA10700-G04*
ABC Батарея питания
Battery
TMX1500-D03
Набор О-прокладок охладителя TMA/X, TM-1500, 3 stage
O-ring set
TMX1500-B03
Набор уплотнений TMA/X (заменен на TMA1500-B03)
GASKET SET
CAFV12420
Воздушный уплотнитель #2 TM1000-1500
AIR SEAL ASSY
CAFV12430
Воздушный уплотнитель #3 TM1000-1500
AIR SEAL ASSY
CAFV12450
Масляный уплотнитель #1 TM1000-1500
OIL SEAL ASSY
CAFV12460
Масляный уплотнитель #2 & #3 TM1000-1500
OIL SEAL ASSY
CST45001-G12
Главный масляный насос -(IM) 60Гц SM3000-5000, TMX, ТМ1750 старый CST45013-04
Main oil pump
CST51137-G01
Датчик давления 0-5 кг (SENSYS)
PRESSURE TRANSMITTER
CST51412-G01
Реле протока охлаждающей воды TMX/Y/Z, SM6000
FLOW SWITCH, WATER
CST51141-G03
Датчик давления 0-15 кг PT262, PT232 air старый код CST51101-02
PRESSURE TRANSMITTER
CST85111-G14*
Помпажный клапан позиционер SM6000
BOV positioner
9100203040
Воздушный фильтр 1 ст SM3000-7000, TMX/Y/Z (заменён на 5929-0101-10)
Inlet Filter 1st
9100203041
Воздушный фильтр 2 ст SM3000-7000, TMX/Y/Z (заменён на 5929-0101-20)
Inlet Filter 2st
CST93011-02*
Болт муфты
CWFY22100-G01
Вставка теплообменника #1 (AL FIN) SM6000 старый код CWFY21100-G01
INTERCOOLER
CWFY22200-G01
Вставка теплообменника #2, #3 (AL FIN) SM6000 старый код CWFY21200-G01
INTERCOOLER
CWFY24200*
Масляный теплообменник SM6000
OILCOOLER BUNDLE ASS
CST13026-01
Резиновое уплотнение (12'') (старый код CST13046-01)
v-joint rubber (12")
CAFV22000-G02
Вставка теплообменника #2 TMX, ТМ 1500 (CU FIN) замена на CAFV26000-G02
INTERCOOLER
CST45008
Клапан контроля температуры TMX/Y/Z, SM3000-SM6000(заменён на 9100403065)
Temp control valve
CST51142-G01
Датчик давления 0-5 кг
PRESSURE TRANSMITTER
5945S1000044*
Преобразователь тока
Ampere transducer
MHD-BTD-001
Датчик температуры подшипников мотора DE (NDE)
RTD sensor
GDR-M01*
GDR-M01 Реле 4E
Relay
GCP31A-10A*
GCP31A-10A
Relay
GCP31A-3A*
GCP31A-3A
Relay
ABS53AF-50AT*
ABS 53 AF-50AT
Relay
ABS53AF-10AT*
ABS 53 AF-10AT
Relay
ABS53AF-20AT*
ABS 53 AF-20AT
Relay
GCP31A-5A*
GCP31A-5A
Relay
GMS-22-AC*
GMS-22-AC 110 V электромагнитный пускатель
Relay
SSO5*
SSO5 AS110V реле
Relay
SZR-MY-2N1*
SZR-MY-2N1 AC 110V реле
Relay
SZR-LY-4N1*
SZR-LY-4N1 AC 110V реле
Relay
9100203003
Воздушный фильтр SA2000, SM2000 (старый 9101403001, 9100203046)
Inlet filterelement
9101401001-01
Масляный фильтр SA2000, SM2000
Oil Filter
CAJV27000-G04*
Концевой охладитель/ сепаратор ТМ 1500
AFTERCOOLER
CMA00526
Ремкомплект масляного кулера SA2000, SM2000 (заменён на CMA00490NEW + 2x9100201021)
oil cooler repair
CMA00483
Ремкомплект промежуточного теплообменника SM3000 Нужно 3 шт замена на AM10-000638A
Inter cooler repair
CMA00484
Ремкомплект масляного кулера SM3000 (заменён на CMA00490NEW + 2x9100201021)
oil cooler repair
TMA1250-B03
Набор уплотнений TMX-1000/1250, 3 stage, 2 pass
GASKET SET
TMX1250-D03
Набор О-прокладок охладителя TMX-1000/1250, 3 stage
O-ring set
CBA25001-ASK01
Ремкомплект промежуточных теплообменников TMB/Y (нужно 2 шт) замена на AM10-000634A
Inter cooler repair
SM1500-D03
Набор O-прокладок охладителя SM 5000
O-ring set
SM0900-B03
Набор уплотнений SM 4000
GASKET SET
SAFV21300-T01
Вставка пром-теплообменника SM5000 (SUS TUBE+CU FIN)
INTERCOOLER
SAFV21400-T01
Вставка концевого теплообменника SM5000 (SUS TUBE+CU FIN)
AFTERCOOLER
1421100902
Вставка пром-теплообменника SM4000
INTERCOOLER
1421200902
Вставка концевого теплообменника SM4000 (SUS TUBE+CU FIN)
AFTERCOOLER
1524000001-G01
Масляный теплообменник TMX/Y/Z, SM4000-SM5000 (старый код SAFV24000)
OILCOOLER BUNDLE ASS
CST05006P-024*
Муфтовое соединение SM4000
Main motor coupling
CBFR05006
Муфтовое соединение SM5000 замена на CBFR05007
Main motor coupling
CST45009
Муфта главного масляного насоса -IMO TMX/Y/Z, SM3000-SM6000
coupling mop
CST45007
Муфта главного масляного насоса -SEIM TM/X/Y/Z, SM3000-SM6000
coupling mop
CST45013-24
Ремкомплект главного масляного насоса TMX/Y/Z, SM4000-6000 не поставляется
MOP repair kit
CST85502-G02
Помпажный клапан позиционер 3" SM4000 замена на HP14-000165A
BOV positioner
CST85502-G03
Помпажный клапан позиционер 4" SM5000
BOV positioner
CST83031-G32
Обратный клапан 5" 10 кг SM3000, SM4000, TMY
Discharge check valv
CST83031-G33
Обратный клапан 6" 10 кг TMX/Y, SM3000, SM5000
Discharge check valv
CST65003-02
Подшипники IGV TM1000 7 шт
BEARING
CST45001-G14
Главный масляный насос SM4000-6000, TMX/Y/Z, ТМ1750 (для Северстали)
Main oil pump
CST55901-02
Модуль питания NX-CPU700P
MODULE CPU
CST55917-09
NX: Материнская плата
NX: MOTHER BOARD
CST55951-10
Сенсорный экран Touch screen 10,4" (NX700) замена на EP10-001598
Touch screen
CAFV25000-G01
Вставка теплообменника #1 TMX, ТМ 1500 (Савинский) (AL FIN) (старый код CAFV21000-G01,CAA25000)
INTERCOOLER
CAA24000
Масляный теплообменник в сборе TMX/Y (Савинский)(замена на 1524000001-G02)
OILCOOLER BUNDLE ASS
CST51301-G03
Трансмиттер вибрации (7м) (SHIN)
transmitter vibratio
CST66002-G03
Привод дроссельной заслонки всаса TMX/Y/Z, SM3000,4000,6000
IGV Actuator ASS'Y
CST85501-G03
Помпажный клапан 4" 110V SM5000
BOV ass'y
CST45006-G01
Масляный фильтр-сетка
Oil filter strainer
SAFV12401
Подшипник #1 (50/60Гц) (старый SAFV12401-00)
BEARING
SAFV12402
Подшипник #2 (50/60Гц) (старый SAFV12402-00)
BEARING
SAFV12403
Подшипник #3 (50/60Гц) (старый SAFV12403-00)
BEARING
SAFV12404
Подшипник #4 (50/60Гц) (старый SAFV12404-00)
BEARING
SAFV12405
Подшипник редуктора (50/60Гц) (старый SAFV12405-00)
BEARING
SAFV12406
Подшипник редуктора BLIND (50/60Гц) (старый SAFV12406-00)
BEARING
1612400001-G01
Карбоновое уплотнение вала #1и #2 SM6/5 (старый CWFY12400-G01)
SEAL ASS'Y
1612400001-G02
Карбоновое уплотнение вала #3 SM6/5 (старый CWFY12400-G02)
SEAL ASS'Y
CWFY12460*
Сальник редуктора (заменен на 1612470001)
OIL SEAL BULL GEAR
9100410024-G03
Главный масляный насос -(SE) 50Гц SM4000 (старый CST45051-G03)
Main oil pump
CST51212-G02
Датчик температуры (75mm)
RTD Sensor
CST51131-G03
Датчик давления 0-15 кг
PRESSURE TRANSMITTER
CST51201-G01
Датчик температуры (50mm)
RTD Sensor
CST51433
Реле уровня масла в маслобаке SA/SM2000, SM3000, SM6000
LEVEL SWITCH
CST13042
Резиновое уплотнение (5'') старый номер CST13022
v-joint rubber (5'')
CST13043
Резиновое уплотнение (6'') (старый CST13023)
v-joint rubber (6'')
CST13044
Резиновое уплотнение (8'') (старый CST13024)
v-joint rubber (8'')
CST05001-G02
Муфтовое соединение TMX/YZ, SM4000 старый код CST05001(B,C 198)
Main motor coupling
CST65101-03
Помпажный клапан позиционер TMX/Y/Z, SM4000, SM6000
BOV positioner
CST83031-G34
Обратный клапан 8" 10 кг SM4000, SM6000
Discharge check valv
SBFR21100-G01
Вставка пром-теплообменника #1, #2 SM4000
INTERCOOLER
HP16-000035A
Вставка промежуточного теплообменника #1#2 SM5000 (Cu-Ni tube,Al fin)
Intercooler Bundle
CST85111-G03
Помпажный клапан позиционер 4" TMX, TM900 (ОМК Сталь)
BOV positioner
TMA1500-B03
Набор уплотнений TMA/X-1500, 3 stage, 2 pass
GASKET SET
CAJV27000-G01
Концевой охладитель/ сепаратор ТМ 900 (ОМК Сталь)
AFTERCOOLER
CST05004-G01
Муфтовое соединение TMX,TM900 старый код CST05004
Main motor coupling
CST83031-G16
Обратный клапан 6" 40 кг SPRING TMX/Y/Z, TM900 старые коды в расш инф
Discharge check valv
CST51121-13
Датчик давления (Cm)
PRESSURE TRANSMITTER
|
放大图片
