简要说明：质量保证一切，诚信是本公司的宗旨。。

GW1-12/400隔离开关GW1-12D/600高压隔离开关

联系人：王总    联系电话：0577-27880112   联系手机：13362763534

GW1-12型户外高压隔离开关适用于装置在户外高压配电设备线路上，供线路在有电压，无负载时切断线路及转换线路之用。本产品是由三个单独的单极隔离开关组成的三相电器。每个单极隔离开关都具有相同的组成部分，如底座支柱绝缘子，前后静触头，闸刀及弧角等。
GW1-12G型户外高压隔离开关是针对远GWI开关存在的一系列问题，按现行的国家标准和国际标准改型设备而成的一种新型开关。开关本身带有接地闸刀，能有效地防止“带电挂地线和带地线合闸”等误操作，操作人员也不必再另挂接地线。该产品其电气性能和机械性能优良，已全面达到国家标准GB1985及其第一号修订和国际电工标准IEC129、IEC694的要求，是现行10KV级户外隔离开关的更新换代产品。
GW1-12连体型户外高压隔离开关属双柱垂直开启式，配用的手动操作机构为CS8-5D防雨型，电动操作机构为CX-6型。笨产品为三相共底架闸刀式开关，可分为底架、绝缘子及导电部分，底架由转轴及弯板和角钢焊成的框架组成，底架上固定六个触座组成，用弹簧压紧。分闸时由操作拐臂带懂转轴旋转，使操作绝缘子向上顶着闸刀和触头分开，闸刀绕触座旋转，触头也在闸刀的带动下向上移动至分闸位置。合闸时由操作拐臂带动转轴旋转，使操作绝缘子拉着闸刀向下转动，在和触头向遇后带懂触头旋转，一起转至合闸位置。

GW1-12/400隔离开关GW1-12D/600高压隔离开关、GW1-12/400隔离开关GW1-12D/600高压隔离开关、GW1-12/400隔离开关GW1-12D/600高压隔离开关、GW1-12/400隔离开关GW1-12D/600高压隔离开关、GW1-12/400隔离开关GW1-12D/600高压隔离开关、GW1-12/400隔离开关GW1-12D/600高压隔离开关

英文解释：

GW1-12 type of outdoor high isolating switch used in device in the outdoor high voltage distribution equipment line, for in a line voltage, no load line and the transformation of the lines cut off with. This product is made up of three separate unipolar isolating switch composition of the three-phase electrical appliances. Each unipolar isolating switch all have the same components, such as base post insulator, and static contact head, the knife and arc Angle and so on.
GW1-12 G type of outdoor high isolating switch is far GWI switch to a series of problems, according to the current national and international standard equipment in the retrofit a new switch. The switch itself with grounding the knife, can effectively prevent the "charged hang landlines and take off ground" wrong operation, the operator also don't have to another hang the ground. The product its electric performance and mechanical performance, has already been fully up to national standards GB1985 and its no. 1 revision and international electrician standard IEC129, IEC694 request, is the current 10 KV level outdoor isolating switch the upgrading of products.
GW1-and even the size of outdoor high isolating switch of double column vertical KaiQiShi, with the manual operation organization for CS8 gives 5 D rainproof-type, electric operator for CX-6 type. Stupid products for three-phase chassis of knife type switch, can be divided into chassis, insulator and conductive parts, chassis and curved plates and by the axis Angle of the welded framework, chassis fixed six touch a composition, with spring pressure. Break-brake operations by turn with the axis rotation arm understand, the operation against the knife and insulator up touch head apart, the knife around a rotating touch, touch the head also in driving the knife moving up to break-brake position. Off by operation when turn drive shaft rotation arm, operation insulator took the knife down turn, in touch and head to the encounter with understand contacts after rotating, turn off together to position.